-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Recompiling the ALSA drivers from the latest cvs fixed the problem
with the computer locking up hard.
But now i dont have any sound.

[root@localhost root]# gmplayer -ao alsa9 file.wav
[snip]
alsa-init: testing and bugreports are welcome.
alsa-init: requested format: 22050 Hz, 2 channels, Unsigned 8-bit
alsa-init: 1 soundcard found, using: hw:0,0
alsa-init: unable to set format: Invalid argument
couldn't open/init audio device -> no sound
Audio: no sound!!!
Video: no video!!!
[root@localhost root]# lsmod
Module                  Size  Used by    Tainted: P
tuner                  11456   1  (autoclean)
tvaudio                14940   0  (autoclean) (unused)
msp3400                18636   1  (autoclean)
bttv                   71456   0  (autoclean)
videodev                8288   3  (autoclean) [bttv]
i2c-algo-bit            8840   1  (autoclean) [bttv]
i2c-core               19268   0  (autoclean) [tuner tvaudio msp3400
bttv i2c-algo-bit]
ide-cd                 33608   0  (autoclean)
cdrom                  33696   0  (autoclean) [ide-cd]
snd-pcm-oss            44420   0  (autoclean)
snd-mixer-oss          15480   0  (autoclean) [snd-pcm-oss]
agpgart                43136   3  (autoclean)
NVdriver             1149216  10  (autoclean)
snd-intel8x0           23648   0  (autoclean)
snd-pcm                83328   0  (autoclean) [snd-pcm-oss
snd-intel8x0]
snd-timer              15304   0  (autoclean) [snd-pcm]
snd-ac97-codec         36100   0  (autoclean) [snd-intel8x0]
snd-mpu401-uart         4812   0  (autoclean) [snd-intel8x0]
snd-rawmidi            18400   0  (autoclean) [snd-mpu401-uart]
snd-seq-device          6176   0  (autoclean) [snd-rawmidi]
snd                    39404   0  (autoclean) [snd-pcm-oss
snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd-ac97-codec
snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore               6532   3  (autoclean) [snd]
autofs                 13348   0  (autoclean) (unused)
eepro100               22264   1
iptable_filter          2412   0  (autoclean) (unused)
ip_tables              14936   1  [iptable_filter]
mousedev                5524   1
keybdev                 2976   0  (unused)
hid                    22244   0  (unused)
input                   5920   0  [mousedev keybdev hid]
usb-uhci               26188   0  (unused)
usbcore                77024   1  [hid usb-uhci]
ext3                   70368   2
jbd                    52212   2  [ext3]
[root@localhost root]# lspci
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and
Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 02)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97
Audio (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV5 [Riva TnT2]
(rev 15)
02:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet
Controller (rev 01)
02:0a.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 11)
02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
[root@localhost root]# lspci -nvv
00:00.0 Class 0600: 8086:1130 (rev 04)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at 48000000 (32-bit, prefetchable)
[size=64M]
        Capabilities: [88] #09 [f104]
        Capabilities: [a0] AGP version 2.0
                Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
                Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x4

00:01.0 Class 0604: 8086:1131 (rev 04)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        Memory behind bridge: 41000000-421fffff
        Prefetchable memory behind bridge: 44000000-45ffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:1e.0 Class 0604: 8086:244e (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: 40100000-403fffff
        Prefetchable memory behind bridge: 42200000-423fffff
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 Class 0601: 8086:2440 (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:1f.1 Class 0101: 8086:244b (rev 02) (prog-if 80 [Master])
        Subsystem: 8086:2411
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Region 0: [virtual] I/O ports at 01f0
        Region 1: [virtual] I/O ports at 03f4
        Region 2: [virtual] I/O ports at 0170
        Region 3: [virtual] I/O ports at 0374
        Region 4: I/O ports at 2460 [size=16]

00:1f.4 Class 0c03: 8086:2444 (rev 02)
        Subsystem: 8086:2411
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 11
        Region 4: I/O ports at 2440 [size=32]

00:1f.5 Class 0401: 8086:2445 (rev 02)
        Subsystem: 0e11:000e
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 10
        Region 0: I/O ports at 2000 [size=256]
        Region 1: I/O ports at 2400 [size=64]

01:00.0 Class 0300: 10de:0028 (rev 15)
        Subsystem: 0e11:001f
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 248 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at 41000000 (32-bit, non-prefetchable)
[size=16M]
        Region 1: Memory at 44000000 (32-bit, prefetchable)
[size=32M]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [60] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [44] AGP version 2.0
                Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
                Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x4

02:08.0 Class 0200: 8086:2449 (rev 01)
        Subsystem: 0e11:0012
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 66 (2000ns min, 14000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at 40100000 (32-bit, non-prefetchable)
[size=4K]
        Region 1: I/O ports at 1000 [size=64]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

02:0a.0 Class 0400: 109e:036e (rev 11)
        Subsystem: 0070:13eb
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 66 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at 42200000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:0a.1 Class 0480: 109e:0878 (rev 11)
        Subsystem: 0070:13eb
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 66 (1000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at 42300000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

[root@localhost root]#

Anybody have any ideas?

Thanks,
Magnus

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com>

iQA/AwUBPdaeFMu3lhUVmrCaEQKRrgCfWeyMfCK7sWgoPBcNc2X27Vnxa4cAn1nW
S9uM/4jgs80rroxB6R+Gm4Re
=HJPH
-----END PGP SIGNATURE-----



-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user

Reply via email to