On Sat, 2002-08-31 at 18:00, [EMAIL PROTECTED] wrote: > Oh, I forgot about how we're not really supposed to use 0.5. > I installed 0.9.0rc3 now and the modprobe snd-intel8x0 worked. > I also installed xmms-alsa-0.9-3 and now alsa shows up as an option in > xmms output plugins. > I also raised all the sound levels with alsamixer. > However, when I tried playing music in xmms, it played but no sound came > out. I see the progress bar moving and the graphical equalizer displays > the music frequencies, but no audio comes out even though I made sure all > the sound levels were up (in alsamixer and in xmms). And of course, my > speakers are turned up. > > I also tried doing /etc/rc.d/init.d/alsasound restart. That unloads all > my modules so I have to do modprobe snd-intel8x0 again then, and I also do > alsamixer again because it reset all the sound levels. I tried xmms again, > but same thing. > > Any ideas?
Did you unmute the channels? Just raising them is not enough :-) Select the channel in alsamixer and press M to mute/unmute. If it's not that, I'm out of clues too :-) If the audio plays on the spectrum and the slider moves at normal speed (not ultra-fast or so) then normally your drivers are ok :) -- Regards, Mathy Vanvoorden ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
