On Sat, 22 Jun 2002 15:10:10 -0500 (CDT)
Mark Khemma <[EMAIL PROTECTED]> wrote:
>
> Hi alsa people
>
> i'm having a problem trying to get two cards to work. I wish to use the
> midi ports from my creative labs pci16 (ens1371) and the four outs from my
> delta 44. When used Takashi's alsaconf. it would find both my cards but
> would only create a modules.conf file for one of them, but not both. So
> in my failed attempt i put both outputs of alsaconf into modules.conf and
> readjusted some of the values:
>
> pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null
> 2>&1 |
> | :
> post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
> >/dev/null 2>&1
> || :
>
> # --- BEGIN: Generated by ALSACONF, do not edit. ---
> # --- ALSACONF verion 0.9.0 ---
> alias char-major-116 snd
> alias snd-card-0 snd-ice1712
> alias char-major-14 soundcore
> alias sound-slot-0 snd-card-0
> alias sound-service-0-0 snd-mixer-oss
> alias sound-service-0-1 snd-seq-oss
> alias sound-service-0-3 snd-pcm-oss
> alias sound-service-0-8 snd-seq-oss
> alias sound-service-0-12 snd-pcm-oss
> options snd snd_major=116 snd_cards_limit=1
^^^^^^^ you have 2 cards :)
> options snd-ice1712 snd_index=0
> # --- END: Generated by ALSACONF, do not edit. ---
> # --- BEGIN: Generated by ALSACONF, do not edit. ---
> # --- ALSACONF verion 0.9.0 ---
> alias char-major-116 snd
> alias snd-card-1 snd-ens1371
> alias char-major-14 soundcore
> alias sound-slot-1 snd-card-1
> alias sound-service-1-0 snd-mixer-oss
> alias sound-service-1-1 snd-seq-oss
> alias sound-service-1-3 snd-pcm-oss
> alias sound-service-1-8 snd-seq-oss
> alias sound-service-1-12 snd-pcm-oss
> options snd snd_major=116 snd_cards_limit=1
^^^^^^^ you have 2 cards :)
> options snd-ens1371 snd_index=1
> # --- END: Generated by ALSACONF, do not edit. ---
>
> this setup will modprobe my delta card, however when i attempt to modprobe
> my ens1371 card i get this error message:
>
> [root@localhost root]# modprobe snd-ens1371
> /lib/modules/2.4.7-10/kernel/sound/pci/snd-ens1371.o: init_module: No such
> device
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters
> /lib/modules/2.4.7-10/kernel/sound/pci/snd-ens1371.o: insmod
> /lib/modules/2.4.7-10/kernel/sound/pci/snd-ens1371.o failed
> /lib/modules/2.4.7-10/kernel/sound/pci/snd-ens1371.o: insmod snd-ens1371
> failed
>
> is my modules.conf wrong somewhere?
> Could someone point me in the right direction,please? in reality i only
> want to use the midi ports from the ens1371, but if i can get full duplex
> with both cards that would be sublime :)
>
>
>
> -thanks in advance
>
> mark .k
HTH,
-Frans
-------------------------------------------------------
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
