Hi! Is there a Fine Manual for controlling the mixers of a card with a Envy24 (Hoontech Sound Track + DSP2000)?
According to the documentation there are two mixers. One is on the card and is called the internal mixer. The other one is in the external box and is called the external one. I have used two software mixers: alsamixer and envy24control. How do they correspond to the hardware mixers? Does alsamixer control the internal mixer and envy24control the external one or something like that? I would like to play music from the hard disk, input sound from microphones to the external box, mix it with the music and output it through the analogue balanced connector (a-out 1 and 2) on the external box. The mono mics would have to be panned to suitable places in the environment. I tried envy24control. I went to the Patchbay/Router page and chose Digital mix L+R. Then I could influence the sound but it only affected the SPDIF out not the analogue output. Still the users guide says: "The external Mixer will only change the audible signal. You can output it either through Output 1,2 and/or through the S/PDIF Output". What should I do to be able to control the analogue output? Also I also tried alsamixer but I couldn't achieve anything. The users guide shows how you do routing in Windows and how you can control buffering et al. How do you do those things with Alsa? Also when I start envy24control there is an error "Unable to read Delta S/PDIF output state: no such file or directory" and occationally "Unable to write Delta S/PDIF output state: no such file or directory". TIA rh _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
