On Sat, 22 Sep 2001, Frans Ketelaars wrote:
>
> Hi, carefully read the INSTALL file in the ALSA driver directory.
> Hint: snd_port - control port # for OPL3-SA chip (0x370)
> means you must use snd_port=0x370, not io=0x370. Also IRQ 11 is not
> a valid IRQ for your card.
Okay, I see what I was doing wrong. The following command:
/sbin/modprobe snd-card-opl3sa2 snd_port=0x370 snd_wss_port=0x530
snd_midi_port=0x330 snd_irq=9 snd_dma1=0 snd_dma2=1
results in the following /proc/modules:
snd-card-opl3sa2 8384 0
snd-cs4231 26256 0 [snd-card-opl3sa2]
snd-pcm 37536 0 [snd-cs4231]
snd-mixer 28800 0 [snd-card-opl3sa2 snd-cs4231]
snd-opl3 5968 0 [snd-card-opl3sa2]
snd-hwdep 4496 0 [snd-opl3]
snd-timer 10864 0 [snd-cs4231 snd-pcm snd-opl3]
snd-mpu401-uart 3616 0 [snd-card-opl3sa2]
snd-rawmidi 11360 0 [snd-mpu401-uart]
snd-seq-device 4416 0 [snd-rawmidi]
snd 43264 1 [snd-card-opl3sa2 snd-cs4231 snd-pcm
snd-mixer snd-opl3 snd-hwdep snd-timer snd-mpu401-uart snd-rawmidi
snd-seq-device]
rlmod 120000 1
ds 6768 2 [rlmod]
i82365 22448 2
pcmcia_core 42240 0 [rlmod ds i82365]
ide-cd 26048 1 (autoclean)
cdrom 26816 0 (autoclean) [ide-cd]
vfat 8816 0 (unused)
fat 30560 0 [vfat]
binfmt_misc 3360 0
binfmt_aout 4336 0
ide-floppy 8928 0
I have run alsamixer and set everything to 100. However, I cannot hear
any sounds from omi_gtk and xmms complains that it can't open the audio.
--
steve
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
