Does any of the new stuff have dual Ethernet ports though? many
locations, I run a single Cat5 from inside a barn. Use the Aux port to
power the Feed SM, and 2.4 out to other buildings.
On 10/3/2024 5:11 PM, Steve Jones wrote:
forced executions of the 1k line, get people closer to killing off
their 2k and buying 4k for 3k backward compatibility
On Thu, Oct 3, 2024 at 4:28 PM Nate Burke <n...@blastcomm.com> wrote:
From bench testing, Looks like it might be a bug introduced in
4.7.0.1. Downgraded an EPMP 1000 2.4 radio from 4.8.1 to 4.6.2
and Aux port is now up at 100/Full. Upgraded to 4.0.7.1 and back
to 100/half, back to 4.6.2 and 100/full. Which really sucks,
because they fixed the DHCP Bug in 4.7.0.1, but broke the aux
port. Maybe that was the fix......
On 10/3/2024 3:47 PM, Josh Luthman wrote:
Probably bad radios but could be the one PC to blame.
I can't imagine they'd offer a 100/half port.
On Thu, Oct 3, 2024 at 4:21 PM Nate Burke <n...@blastcomm.com> wrote:
I was just looking through some of my EPMP 1000 2.4 Radios
that I use to
POE out to a EPMP F300 Feed radio. It seems that the
Ethernet port on
the Aux port is reporting 100/Half. I just tested on the
bench with 2
EPMP 1000 2.4ghz radios plugged into my PC and see the same.
Do I have
multiple bad radios, or is that normal? Ethernet into the
Main port
shows 100/Full. Ethernet into the Aux port is 100/Half.
Radios are on firmware 4.8.1
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
