>From a relay spec sheet: “12A FLA, 30A LRA 30x103 (N.C.) 250VAC, Definite >Purpose”
I’m fuzzy on “Full Load Amps” vs “Load Running Amps” on these relay specs. Is this like continuous vs peak? What does “Defiinte Purpose” mean? These are probably perfect Jamie Solorza questions if he was still around….. From: AF <af-boun...@af.afmug.com> On Behalf Of ch...@go-mtc.com Sent: Wednesday, August 07, 2024 4:03 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Power relay sockets and mount types Might work if the terminals are long enough. From: dmmoff...@gmail.com <mailto:dmmoff...@gmail.com> Sent: Wednesday, August 7, 2024 1:45 PM To: 'AnimalFarm Microwave Users Group' Subject: Re: [AFMUG] Power relay sockets and mount types Interesting….Other 11-pin blade sockets also seem to match up. So….there’s a standard 11-pin blade socket? Is it from a standards body like IEC or they just sort of landed on one design? -Adam From: dmmoff...@gmail.com <mailto:dmmoff...@gmail.com> <dmmoff...@gmail.com <mailto:dmmoff...@gmail.com> > Sent: Wednesday, August 07, 2024 3:25 PM To: 'AnimalFarm Microwave Users Group' <af@af.afmug.com <mailto:af@af.afmug.com> > Subject: Power relay sockets and mount types I’m not as familiar with these things as I would like. I’m looking at this data sheet for a power relay at Mouser: https://www.mouser.com/datasheet/2/418/9/ENG_DS_1308242_KUHP_0914_KUHP_0914-3344401.pdf In the bottom right corner on the first page it says “no sockets are available for this relay”. TE’s web site refers to it as a “Panel” mount type and “Plug-in” connection type. So it sure looks and sounds like it should plug into some kind of socket. After a lot of screwing around I think I’ve determined that the pins and dimensions look incredibly similar to SquareD/Schneider K-Type sockets. Is this a situation where TE is making a product compatible with the SquareD/Schneider socket, but can’t refer to the that socket because it’s someone else’s intellectual property? And am I supposed to just know by looking that it’s a “K Type” socket? I think I’ve figured this out, I guess I’m looking for confirmation or correction. Relay Spec Schneider KL Spec _____ -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
