Well, not sure about the semantics, but when he said “booster” I was picturing an amp rather than a repeater.
Antenna <-> Bidirectional amp <-> Cradlepoint I haven’t done it, but If that’s the setup that doesn’t sound crazy. From: AF <af-boun...@af.afmug.com> On Behalf Of Steve Jones Sent: Sunday, May 21, 2023 9:18 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Cellular router question I worked with the cradlepoint engineers. We had a hard time finding any scenario where a repeater would not cause more harm than good. Ended with a 700 dollar antenna recomended so price wasnt even all that much more than a quality repeater. The biggest concern was the unavoidable feedback loop that would occur On Sun, May 21, 2023, 6:07 PM Jaime Solorza <losguyswirel...@gmail.com <mailto:losguyswirel...@gmail.com> > wrote: That's what I was thinking... On Sun, May 21, 2023, 12:48 PM Steve Jones <thatoneguyst...@gmail.com <mailto:thatoneguyst...@gmail.com> > wrote: Just went through this with a customer. Dont do it. Get a sim router with external connector and go to an external antenna On Sun, May 21, 2023, 1:31 PM Jaime Solorza <losguyswirel...@gmail.com <mailto:losguyswirel...@gmail.com> > wrote: I have an upcoming project to install a cellular router in a canyon site with spotty service..(-127, -138dBm)... I was wondering if anyone has used the output port of booster with cable to input port of cellular router? -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
