It's related to your hold timer and your convergence time. Lower to 14/45s
and it will be much faster.

On Wed, Apr 19, 2023, 5:31 PM Mark - Myakka Technologies <m...@mailmt.com>
wrote:

> Trey,
>
> That is the main question.  If it takes the rest of the Internet 10 mins
> to figure out my BGP dropped, does it matter if I spend $$$$$ of some super
> fast router that can build the tables in 30s?
>
> --
> Best regards,
>  Mark                            mailto:m...@mailmt.com
>
> Myakka Communications
> www.Myakka.com
>
> ------
>
> Wednesday, April 19, 2023, 5:55:30 PM, you wrote:
>
> TS> You can prevent this by having a backup default route. The other thing
> is if you are n a physical interface or aggregated interface with a vlan on
> your upstream's router. If its physical it should stop routing traffic when
> it sees the interface down. If not it may keep trying to send traffic down
> that interface. BFD can help with this. It will Also depend on how your
> provider handles the traffic when the  the session with you terminates. If
> it will forward it on to your other providers or not. If your alternate
> providers are connected closely to you it shouldn't take to long, but it
> can take 10-20min for the loss of the peer to propagate across all global
> routing tables.
>
> TS> On 4/19/23 9:47 AM, Mark - Myakka Technologies wrote:
> >> We have two circuits coming into our NOC.  We peer with 3 different
> providers on each circuit.  If a circuit fails, BGP will do it's magic and
> traffic will start flowing though the surviving circuit.
> >>
> >> However, we seemed to get about 5 - 10 minutes of unstable Internet
> while this is happening.  Is this normal? If not, what can I do to speed up
> the process?  Is it a function of my routers having to rebuild routes?
> Will new faster routers help?  Is it a function of timers?  Keep-Alive is
> 30s and hold is at 90s.  Should I investigate BFD?
> >>
> >> How fast could I expect to get this fail-over to work under best
> conditions?
> >>
> >> Thanks,
> >>   Mark                          mailto:m...@mailmt.com
> >>
> >> Myakka Communications
> >> www.Myakka.com
> >>
> >>
>
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to