That’s not a crazy theory.  A band 41 radio can have pretty high Tx power.  

 

 

From: AF <af-boun...@af.afmug.com> On Behalf Of Darin Steffl
Sent: Wednesday, January 18, 2023 11:27 AM
To: AnimalFarm Microwave Users Group <af@af.afmug.com>
Subject: Re: [AFMUG] Cell tower with 2.4ghz?

 

Cell companies do not use 2.4 at all.

 

The antenna you circled appears to be t-mobile B41 which is their 2.5ghz 
spectrum. So maybe that is bleeding over into the 2.4 band a little.

 

On Wed, Jan 18, 2023, 9:55 AM <dmmoff...@gmail.com <mailto:dmmoff...@gmail.com> 
> wrote:

I haven’t seen a cell company using 2.4ghz.  None of the LTE bands 
(https://www.sqimway.com/lte_band.php) overlap with 2.4ghz, and I can’t imagine 
they’d backhaul with it.  It could be something like an OOB management network 
between towers, but that’s just speculation. 

 

Either way I think you have no recourse except to swap to a different band.  
Presumably your ePMP interferes with whatever they’re doing too, but if it’s 
something where their needs are light then maybe they don’t care.  

 

 

 

From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf 
Of Josh Heide
Sent: Tuesday, January 17, 2023 5:45 PM
To: af@af.afmug.com <mailto:af@af.afmug.com> 
Subject: [AFMUG] Cell tower with 2.4ghz?

 

We have an old site that services some customers with ePMP 1000 2.4ghz as 
unfortunately since they have LOS. However right before Christmas noise floor 
change from tolerable to -59 across the entire spectrum. Last few days we been 
looking for the source and appears to be coming from a cell tower.  Has anyone 
else seen cell companies using 2.4ghz? Here is a couple of photos along with 
what I think is the device that’s putting out 2.4ghz. anyone have an idea what 
that is?

 



 



 

Thanks in advance,

 

Josh

 

 

 

-- 
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com> 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to