Yes and pull and extra one or an extra mule tape at the same time.
-----Original Message-----
From: Chris Fabien
Sent: Friday, July 22, 2022 12:35 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] Type of Fiber to pull through Poly
Flat drop would be fine for this, use tonable if you need a locate method.
On Fri, Jul 22, 2022 at 2:27 PM Nate Burke <n...@blastcomm.com> wrote:
I need to pull 12 strand fiber through a 1.25" poly. About 1500' and 4
handholes. It's been a couple years since we've done physical fiber
installation underground, and that was mostly 128 strand. Should I get a
flat drop cable, or would a different type be better? Flat vs round?
The handholes are only 18x30, so not very big. The 48 Strand that's
coiled in the handholes now takes most of the space. It'll be an empty
poly that this line runs through.
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
