Just had it happen on a newly installed EPMP1000<->EPMP1000 link. AP and SM are both 2.4 non-GPS radios. Feed to site is a 450B off a450M AP. Relay from barn to house using 2.4 EPMP 1000 radios.

Was working fine when I left, 3 hours later, DHCP lease timed out (Mikrotik DHCP Lease time) and would not get new lease. Rebooting the 1000 Radio acting as the AP fixed it. If it happens again, I'll try to get a packetcapture off it.

On 3/9/2022 10:14 AM, Steve Jones wrote:
the mikrotik is dhcp relay, BMI is the dhcp server

On Wed, Mar 9, 2022 at 10:07 AM Josh Luthman <j...@imaginenetworksllc.com <mailto:j...@imaginenetworksllc.com>> wrote:

    Oh this is on the DHCP server, sorry.

    On Wed, Mar 9, 2022 at 10:31 AM Steve Jones
    <thatoneguyst...@gmail.com <mailto:thatoneguyst...@gmail.com>> wrote:

        we have to have it for dhcp relay to keep functioning.
        otherwise it periodically stops working from EPMP APs, I never
        knew why, mikrotik had no answer, but it would suddenly get
        caught up in non ACL drops add action=accept chain=input
        comment="ALLOW DHCP UDP 67" dst-port=67 log-prefix=dhcp
        protocol=udp

        On Wed, Mar 9, 2022 at 8:12 AM Josh Luthman
        <j...@imaginenetworksllc.com
        <mailto:j...@imaginenetworksllc.com>> wrote:

            The input chain is to the Mikrotik itself, ie the IP
            address that it would theoretically get from the DHCP
            server.  I was thinking of a managed Mikrotik as a demarc
            to the customer's stuff (so forward chain).

            On Tue, Mar 8, 2022 at 7:57 PM Steve Jones
            <thatoneguyst...@gmail.com
            <mailto:thatoneguyst...@gmail.com>> wrote:

                I had this issue a long time ago, id like to think
                that it was a firmware revision that resolved the
                issue, but it was a long time ago and im partially
                retarded.
                If you have a mikrotik, add an input rule allow udp
                67. Just for kicks. It might be this issue that i have
                that policy for.

                On Tue, Mar 8, 2022, 4:22 PM Josh Luthman
                <j...@imaginenetworksllc.com
                <mailto:j...@imaginenetworksllc.com>> wrote:

                    Raise a ticket with Cambium and explain the
                    situation?  If you could get pcap that would show
                    what's missing.  Do you have a Tik behind any SM
                    with the issue by chance?

                    On Tue, Mar 8, 2022 at 4:05 PM Nate Burke
                    <n...@blastcomm.com <mailto:n...@blastcomm.com>>
                    wrote:

                        No DHCP Relay, just local DHCP Server on the
                        mikrotik on the bridge that all the AP's are
                        part of.

                        No MAC limit on the SM's

                        When it exhibits itself, a customer who has
                        been running for weeks will timeout their
                        lease, and the mikrotik will just go to
                        'offered'  Rebooting the AP always fixes it.

                        On 3/8/2022 1:18 PM, dmmoff...@gmail.com
                        <mailto:dmmoff...@gmail.com> wrote:

I was wondering about broadcast rate limit. That would apply to a DHCP discover, but not
                        to a renewal.  ….but either the MAC limit or
                        broadcast limit would clear when rebooting
                        the SM, and he says rebooting the SM has no
                        effect.

                        Is DHCP running on the port that the AP is
                        plugged into, or is there a DHCP relay involved?

                        *From:* AF <af-boun...@af.afmug.com>
                        <mailto:af-boun...@af.afmug.com> *On Behalf
                        Of *Josh Luthman
                        *Sent:* Tuesday, March 08, 2022 12:43 PM
                        *To:* AnimalFarm Microwave Users Group
                        <af@af.afmug.com> <mailto:af@af.afmug.com>
                        *Subject:* Re: [AFMUG] EPMP1000 and DHCP failures

                        Do you have the SM limited on MACs?  Look at
                        Ethernet Port Security on config > network.

                        On Tue, Mar 8, 2022 at 12:32 PM Nate Burke
                        <n...@blastcomm.com
                        <mailto:n...@blastcomm.com>> wrote:

                            I've experienced this issue randomly, and
                            haven't been able to track
                            down a cause.  Wondering if anyone else
                            has come across something similar.

Mikrotik DHCP Server. EPMP1000 GPS AP, Force 300 SM.

                            At a random time, one or More Force 300
                            SM's on the AP will lose the
                            ability to hand out a DHCP Address to the
                            client.  The Mikrotik just
                            shows 'Offered'

                            Rebooting or powercycling the SM has no
                            effect.  If the SM Connects to a
                            different sector, then DHCP is
                            immediately handed out.  If the AP
                            reboots, and the SM reconnects, then DHCP
                            is immediately handed out.  If
                            the SM is set for NAT mode, it can get a
                            DHCP Address just fine, but
                            switching back to bridge, the Customer
                            router will not get DHCP.

                            I've experienced this from 4.4.3 all the
                            way up to 4.6.3.  It always
                            seems to be an EPMP1000 AP with a Foce300
                            SM, but does not affect every
                            Force300 SM at the same time.

                            At least now I know when I start having
                            this problem to go reboot the AP.

-- AF mailing list
                            AF@af.afmug.com <mailto:AF@af.afmug.com>
                            http://af.afmug.com/mailman/listinfo/af_af.afmug.com




-- AF mailing list
                        AF@af.afmug.com <mailto:AF@af.afmug.com>
                        http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- AF mailing list
                    AF@af.afmug.com <mailto:AF@af.afmug.com>
                    http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- AF mailing list
                AF@af.afmug.com <mailto:AF@af.afmug.com>
                http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- AF mailing list
            AF@af.afmug.com <mailto:AF@af.afmug.com>
            http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- AF mailing list
        AF@af.afmug.com <mailto:AF@af.afmug.com>
        http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- AF mailing list
    AF@af.afmug.com <mailto:AF@af.afmug.com>
    http://af.afmug.com/mailman/listinfo/af_af.afmug.com




-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to