That would be Ye-Link.

The question I have is "Ye" pronounces "Yay" (long A sound) or is it pronounced "Yee" (long E sound"?


bp
<part15sbs{at}gmail{dot}com>
On 10/23/2021 8:43 AM, Chuck McCown via AF wrote:
I don’t trust phones made by Kanye.

Sent from my iPhone

On Oct 22, 2021, at 2:26 PM, Nate Burke <[email protected]> wrote:

 Check what Codec's it's using too.  I've run into some issues with letting the phone/PBX choose a codec.  Especially regarding packet size.  Locking it to PCMU cleared up the problems.  The different phone models negotiated the codecs differently, so different models would either have the problem, or not. 

On 10/22/2021 3:06 PM, TJ Trout wrote:
I had the same issue with some grandstream wifi phones, switched to ethernet still the same, swapped to a different firmware still the same, swapped phones to a different model and all was cured, but not before wasting a ton of time troubleshooting the network

On Fri, Oct 22, 2021 at 12:58 PM <[email protected]> wrote:

VoIP issues are almost always network issues.   Like 99% of the time.

It sounds like you’ve looked for a network issue, but if it’s at all possible to look harder then look harder.

 

From: AF <[email protected]> On Behalf Of [email protected]
Sent: Friday, October 22, 2021 10:39 AM
To: [email protected]
Subject: [AFMUG] Yealink Phones

 

Good morning all,

 

We have recently ran into major issues using Yealink phones, particularly T54W and T57W. Calls are broken and dropping. We have determined the ISP and internal networking is not the issue due to the fact that these issues are not specific to one customer.  Does anyone have experience these products they would like to share the do’s and don’t’s with the Yealink platform? We have been making small adjustment to the voice settings of the hardware but are not having any luck. We are not showing any packet loss between customer and cloud. We are using Unifi switches and Mikrotik RB2011 firewall. We also head similar results using a SonicWALL. VOIP traffic is all travels though the Mikrotik and LAN uses the Sonic wall.  Quality issues are becoming more and more frequent but are still very random. Yealink support is looking into this but not moving fast enough. Thank you in advance for any information you can share. I am open to any suggestions at this point. If there is a better suited platform to ask this question please let me know. I figured I would start with the smartest group of people I know.  

 

Darrick Potter

Structured Cabling and Security

517 797 3710 ext 110

[email protected]

 

<mime-attachment.jpg>

 

--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com



--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com



-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to