Ive been curious as more SAS revisions come to fruition what the hardware demand on the SAS admins backends will become. I assume the information is available somewhere but im curious what the primary SAS Admins billable CBSD count is. Its got to be a boatload
On Mon, Apr 26, 2021 at 3:08 PM Adam Moffett <[email protected]> wrote: > So the "Interference Calculations Pending" state cleared up after about 4 > hours. > > For any who might be curious: Commscope says when you're in that state > that you're within the protection zone of an incumbent operator and you're > waiting for IAP, and that yes this can take hours. > > IAP was a new term for me today. Iterative Allocation Process. What I'm > gathering is that the incumbent has a total interference quota, and during > the IAP the SAS is calculating an "interference contribution" for every > CBSD (every AP and SM) in the protection area to make sure your SM isn't > the one that pushed the incumbent over their interference quota. I'm > reading that the IAP processing time is affected by "The incumbents nearby, > the contour and the *density of the CBSDs in one location." *I hope that > doesn't mean that these wait times will get longer as more radios are > deployed......but that's kinda what it sounds like. > > > On 4/26/2021 11:26 AM, Adam Moffett wrote: > > These channels were call clear on the SA. We are definitely in range for > both the coastal radar and a grandfathered earth station in Roaring Creek > PA, so I assumed it was related to one of those, but I'm only assuming. > > > On 4/26/2021 11:23 AM, Steve Jones wrote: > > my guess is its overlapping another operator, or yourself. have you setup > the colocation parameters or whatever theyre called yet? > > On Mon, Apr 26, 2021 at 10:11 AM Adam Moffett <[email protected]> wrote: > >> Sometimes when adding an SM to the SAS I get a message back saying >> >> "Grant Suspended: 501 Interference Calculations Pending." >> >> Usually this clears in a few minutes, but sometimes it's hours. I have >> one that cleared up at some point overnight, but somehow later became >> unregistered on the following weekend. So I restarted the grant process >> on that one this morning and it's back to "Interference Calculations >> Pending". >> >> So is this interference calculation an automated step or a manual one? >> Why do some locations not need it, why do some get past it quickly and >> some don't? >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
