yes you can do this I have in some areas where I can lease Dark fiber in
a PON setup from the community fiber provider. However I wouldn't
recommend it for a standard setup It will require you to put filters at
every one of you endpoints. You have to filter out all other channels
going to the customer on most equipment because they don't filter out RX.
On 4/2/21 3:28 PM, Chuck McCown via AF wrote:
Pretty sure you can just use the right wdm equipment and do this. I
know I have seen power points from Calix showing how you layer GPON
with NGPON, NGPON_2, NGPON-3 etc etc on the same strand.
It would be similar to a diplex filter I would think.
-----Original Message----- From: Adam Moffett
Sent: Friday, April 2, 2021 2:15 PM
To: AnimalFarm Microwave Users Group
Subject: [AFMUG] GPON through MUX?
Why isn't there a MUX that carries GPON on one port and then also allows
me a few ethernet paths on other wavelengths? I feel like this would be
a really useful thing for people leasing dark fiber, so I can't fathom
why it's not a commodity item.
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
