Dont know if this has potential to be ptmp in the future or not, we used a ton of 180 for site ptmp, if it may become that only replace with another 1000 or 2000 series, 3000 SMs wont do ptmp now
On Sat, Mar 6, 2021, 6:05 PM Jaime Solorza <[email protected]> wrote: > Not a SCADA link... > > On Sat, Mar 6, 2021, 4:32 PM Chuck McCown via AF <[email protected]> wrote: > >> HACKED BY CHINESE >> >> *From:* Jaime Solorza >> *Sent:* Saturday, March 6, 2021 1:57 PM >> *To:* AnimalFarm Microwave Users Group >> *Subject:* [AFMUG] Cambium Force 180 >> >> Hey gents: have a PTP short link with pair of Cambium radios which had >> been solid for three years. Last week the link would drop...so I changed >> frequencies and it would work for a few hours...replaced POEs...same >> thing.. >> Upgraded firmware and it made it worse...on Monday I am going to buy a >> new set of radios to replace these but what do you think is causing this? >> There is some noise out there but I found some clean channels... >> Thanks >> >> ------------------------------ >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
