Josh, Is the dish the old force 200 and force 300 dish still on that 425? Wondering if the Radomes still fit on this new model?
Thanks, Brandon From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Josh Luthman Sent: Wednesday, February 03, 2021 2:23 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Cambium's new 802.11ax ePMP PTP solution, the ePMP Force 400 Series -- 1GBps PTP Me Josh? I've got a PTP Force425 up between a 4 story building and a tiny little Rohn SSV about 4 miles away. It was a Force 200-25. Signal is great, only noise is us, etc. We get 12.5 b/hz. So 20 MHz is 250 mbps. I can ramp that up to 500 mbps for 40 MHz and, while I haven't tried it, upwards of 1gbps in 80 MHz. Hardware is wonderful, we get the perfected Force 200 hardware back. The only complaint I have is we're switching to 48v. So far an AC site it's just a minor inconvenience but for a DC without a 48v bus you're going to need a solution. It's a great product. It's Cambium. Not sure what else there is to say - buy them, hang them, move on to the next install. Josh Luthman 24/7 Help Desk: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Feb 3, 2021 at 10:19 AM Lincs_Chel <lhan...@enc-tech.com> wrote: Hi Josh; I am not sure if it is you that Cambium was referring to in their Webinar introducing the new ePMP Force 400 series PTP, but if it is, can you speak about the performance and any other experiences with reference in regards to this. Or if anyone else have experiences so far with this new series. Thanks, Lincs -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
