No, they go in dedicated battery enclosures and/or sit on mats in larger buildings.
On Wed, Feb 3, 2021 at 3:53 PM Josh Luthman <j...@imaginenetworksllc.com> wrote: > Specifically for ICT, you need to adjust the LVD to be higher than the > BMS's cut off. If you let it drop with the BMS, it's 0v and then the > battery is basically gone until you reset it (like drive out there and > physically push a button). Float voltage I'm told you need to change, too. > > Looking at the NSB100FT RED, these are nearly a foot tall. Are you > mounting them in the rack? That's 7U of space, which I suppose isn't > massive (I was previously looking at lithium ion before learning about the > complications, that was 6U). > > Josh Luthman > 24/7 Help Desk: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Wed, Feb 3, 2021 at 3:01 PM Chuck McCown via AF <af@af.afmug.com> > wrote: > >> I presume if the float voltages are the same you could. But not if they >> are different. >> >> *From:* SmarterBroadband >> *Sent:* Wednesday, February 3, 2021 11:52 AM >> *To:* 'AnimalFarm Microwave Users Group' >> *Subject:* Re: [AFMUG] Battery recommendations at fiber hut >> >> >> Can you connect batteries like this, with built in BMS, directly into a >> system like ICT made for SLA/AGM? >> >> Adam >> >> >> >> *From:* AF [mailto:af-boun...@af.afmug.com] *On Behalf Of *Louis >> Arsenault >> *Sent:* Wednesday, February 3, 2021 4:48 AM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Subject:* Re: [AFMUG] Battery recommendations at fiber hut >> >> >> >> We have been using PowerTec Solutions >> >> >> https://www.powertecsolutions.net/solutions/#psi-micro-vision-48v-rackmount-battery-series >> >> We have 4 of them setup in the fiber hut. >> >> They have a BMS to protect the batteries from overcharging / >> overcurrenting >> >> >> >> On Tue, Feb 2, 2021 at 3:33 PM Josh Luthman <j...@imaginenetworksllc.com> >> wrote: >> >> I'm looking at a 1200 watt load and would like to see 2 or 3 hours of run >> time. Everything's 48vdc. >> >> >> >> I'm kind of leary about using lithium ion since I'm using an ICT power >> supply and their system is designed for SLA/AGM. >> >> >> >> What kind of things should I be looking for? I thought these looked >> pretty good: >> >> >> https://www.batteriesplus.com/productdetails/battery/sla-sealed-lead-acid/12/wkdc12=80pus >> >> >> >> 12v*80a=960whr >> >> 4 of these = 3840whr >> >> Runtime upwards of 3.2 hours (obviously there will be loss, but shouldn't >> I expect 2+ hours)? >> >> >> >> Josh Luthman >> 24/7 Help Desk: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> ------------------------------ >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
