Closest I've come is a customer whose phone system (Toshiba?) died and I
replaced it with a Grandstream UCM and VoIP phones, but they had an outdoor
paging system with a Valcom amplified horn speaker.  I used one of these:

https://www.cyberdata.net/collections/sip/products/011324

Very expensive.  But it works.

You want it to auto answer the call and put it over the speaker.  If they
have music, it should pre-empt the music.  I think it also has a "night
ringer" feature, this customer doesn't use that.


-----Original Message-----
From: AF <[email protected]> On Behalf Of Charles Boening
Sent: Tuesday, December 22, 2020 6:36 PM
To: AnimalFarm Microwave Users Group <[email protected]>
Subject: Re: [AFMUG] Old Phone Question

I think this is what we used to interface with an old key system that had a
line in input.  I think Viking has something similar.

https://www.bhphotovideo.com/c/product/745342-REG/Bogen_Communications_TAMB2
_TAMB2_Telephone_Access_Module.html

http://www.bogen.com/products/pdfs/telephonepagepdfs/TAMB2s.pdf


__________________________________

Charles Boening
Network Manager
800-858-2399 | Office
[email protected]
 
www.cot.net | Find us on Facebook
__________________________________ 
Cal-Ore  | Local. Trusted. Professional.   

-----Original Message-----
From: AF <[email protected]> On Behalf Of Nate Burke
Sent: Tuesday, December 22, 2020 4:02 PM
To: Animal Farm <[email protected]>
Subject: [AFMUG] Old Phone Question

EXTERNAL EMAIL - Use caution when opening attachments, clicking links, or
sharing sensitive information.


So I'm not saying it's old.... but this was put in when I was still in High
School

Valcom V-2001 paging system.  I'm looking to convert the driving phone
system over to VoIP.

I've found the manual here.  https://www.valcom.com/pdf/v-2001.pdf

It references terms I'm not familiar with.  It says 'Compatible with Any
Electronic Key or PABX'  Does that mean that I can use an ATA to plug into
it?  Or is this something special?

There are currently wires hooked up to contacts labeled 'Page Tip/Page Ring'
And 'UNA Ringing' (2 wires)  I"m guessing Page Tip/ring are the 2 wires that
would run to the ATA, but what is UNA Ringing?

Anybody hooked one of these up to an ATA before?


--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com



-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to