These are 3' dishes, and the radio manufacturer that I'd like to use (Bridgewave) does not sell an adapter unfortunately.
On Thursday, December 10, 2020, Ken Hohhof <[email protected]> wrote: > Any chance your radio manufacturer sells an adapter from whatever mount is > already on the antennas? Like we have gone the opposite way, we had some > existing antennas with Remec circular because the original radios were > Trango Apex Plus, and we got a Remec-to-Ceragon adapter through Cambium. > > > > For a 2 ft dish I would maybe just replace the dish, for 3 ft and above > it’s maybe worthwhile trying to use what’s there. Depending on how much > you enjoy mounting dishes on towers. > > > > *From:* AF <[email protected]> *On Behalf Of *Jason McKemie > *Sent:* Thursday, December 10, 2020 4:53 PM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* Re: [AFMUG] Commscope Valuline Remec > > > > Yes, they do. I wish I had gone with them initially. I'm looking to use > some antennas that are already in the air for this particular link. > Apparently Commscope completely stopped making Remec mounts for their > antennas. > > On Thursday, December 10, 2020, Ken Hohhof <[email protected]> wrote: > > Does Radiowaves make what you need? They are more expensive but we > usually like their mechanical design better and they tend to need less > assembly work. Wish they had provisions for a stiff arm on the smaller > dishes though. > > > > *From:* AF <[email protected]> *On Behalf Of *Jason McKemie > *Sent:* Thursday, December 10, 2020 4:08 PM > *To:* AnimalFarm Microwave Users Group <[email protected]> > *Subject:* Re: [AFMUG] Commscope Valuline Remec > > > > Thanks, that's disappointing. I like the antennas, but may have to switch > vendors. > > On Thursday, December 10, 2020, Eric Nielsen <[email protected]> > wrote: > > Hi Jason, > > > > I'm with CommScope. Just checked with the antenna group and they confirmed > that it has been discontinued due to low volumes. > > > > Thanks, > > Eric > > > > On Thu, Dec 10, 2020 at 11:21 AM Jason McKemie < > [email protected]> wrote: > > Is anyone out there using a Commscope 11GHz antenna with a remec circular > interface? Commscope is telling me the interface plate is discontinued, > which seems strange since I would think it would be a fairly common type. > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
