Does it seem to work better in PTP mode with the previous firmware? I'm seeing drops/disconnects.
On Saturday, September 19, 2020, Sterling Jacobson <sterl...@avative.net> wrote: > Mikrotik 60GHz PTP is great. > > > > PtMP is tricky. The chipset really isn’t designed for that, but we are > doing it. > > The trick is to use a previous firmware, not the latest. > > I like the latest long term release for 60GHz PtMP. > > Otherwise there are lots of drops and disconnects; which oddly is what in > the release notes says the later/latest versions fix, but it does not. > > Also not loading them up to 8 clients, maybe keep them at 4-5 clients. > > > > That’s my 2 cents. > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Mathew Howard > *Sent:* Saturday, September 19, 2020 10:35 AM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* Re: [AFMUG] Mimosa B24 > > > > We must have a couple of dozen Mikrotik 60ghz links up now... I haven't > seen any real problems with them. > > > > On Sat, Sep 19, 2020, 8:06 AM Mike Hammett <af...@ics-il.net> wrote: > > Strange. I have a friend that has somewhere around a 100 links and keeps > deploying more of them. *shrugs* > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > > > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > ------------------------------ > > *From: *"Jason McKemie" <j.mcke...@veloxinetbroadband.com> > *To: *"AnimalFarm Microwave Users Group" <af@af.afmug.com> > *Sent: *Friday, September 18, 2020 11:11:59 PM > *Subject: *Re: [AFMUG] Mimosa B24 > > The mikrotik has been super flakey, maybe it is just bad hardware, but I > figured 24 would be a better fit. > > On Friday, September 18, 2020, Mathew Howard <mhoward...@gmail.com> wrote: > > In my experience, Mikrotik 60ghz is less sensitive to alignment than the > B24 because of the beamforming on the Mikrotiks. > > > > I've never been able to get a full gig out of the B24s, but I think the > shortest link I've done with them is around a mile and a half. > > > > 60ghz shouldn't have any problems at a half mile... > > > > On Fri, Sep 18, 2020, 9:45 PM Jason McKemie <j.mckemie@veloxinetbroadband. > com> wrote: > > That could be due to power output as well, but I thought it was worth a > try. > > On Friday, September 18, 2020, Jason McKemie < > j.mcke...@veloxinetbroadband.com> wrote: > > Yes, I would assume that would be less of an issue at 24GHz than 60GHz. I > didn't have any issues at all at 39GHz. > > On Friday, September 18, 2020, Ken Hohhof <af...@kwisp.com> wrote: > > Utility pole? Sounds like a narrow beamwidth issue. > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Jason McKemie > *Sent:* Friday, September 18, 2020 9:03 PM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* Re: [AFMUG] Mimosa B24 > > > > I'm doing less than half a mile, but one end is on a utility pole, and > 60GHz isn't working so well. That may just be a mikrotik issue though. > > On Friday, September 18, 2020, Sterling Jacobson <sterl...@avative.net> > wrote: > > Frankly I don’t log in to it, or the Mimosa cloud very often. > > We use it at shorter ranges, so not sure what max distance is. > > Seems to be able to do 1Gbps one direction at any given time, not sure if > it’s FDX. > > We don’t load them up though, just handling regular 100-200Mbps daily peak > traffic on some sites where we need clean backhaul transport and smaller > footprint than Airfiber for example. > > > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Mathew Howard > *Sent:* Friday, September 18, 2020 4:15 PM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* Re: [AFMUG] Mimosa B24 > > > > Yep... they work as expected. > > > > Kind of need to know what you wants to do with them to get any less open > ended. > > > > On Fri, Sep 18, 2020 at 2:01 PM Robert Andrews <i...@avantwireless.com> > wrote: > > That's an open ended answer... > > On 09/18/2020 11:18 AM, Sterling Jacobson wrote: > > Yep. > > > > Works as expected. > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Jason McKemie > > *Sent:* Friday, September 18, 2020 11:42 AM > > *To:* AnimalFarm Microwave Users Group <Af@af.afmug.com> > > *Subject:* [AFMUG] Mimosa B24 > > > > Is anyone using these? Thoughts? > > > > > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
