Just curious what kind of data you need for an air compressor?

On Wed, Aug 19, 2020 at 11:51 AM TJ Trout <t...@voltbb.com> wrote:

> apc uses rj10's for usb..
>
> On Wed, Aug 19, 2020 at 9:46 AM Ken Hohhof <af...@kwisp.com> wrote:
>
>> Apparently modbus is a data protocol, not a physical layer standard, but
>> yes it could go over RS485.  I don’t see how a simple cable could convert
>> from USB to RS485.  I sure hope for $200 you are getting a dongle, not an
>> expensive cable.
>>
>>
>>
>> The connector you are referring to, is that a 4 pin modular plug, like
>> used on the handset cord for a phone?
>>
>>
>>
>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *ch...@wbmfg.com
>> *Sent:* Wednesday, August 19, 2020 11:27 AM
>> *To:* af@af.afmug.com
>> *Subject:* [AFMUG] OT odd data connection
>>
>>
>>
>> On one of my large portable air compressors, there is a data port.  They
>> sell an adapter cable for about $200  It adapts it to USB.  The program
>> that you use to talk to it makes reference to modbus.
>>
>>
>>
>> The data port has 4 pins.  RJ-10 4p4c connector.
>>
>> +5 with enough current to light an incandescent light bulb.
>>
>> +5 low current
>>
>> +5 low current
>>
>> Ground
>>
>>
>>
>> This sounds like USB host to me.  One of my sons think it is RS-485
>>
>>
>>
>> I don’t think USB would be happy on a RJ-10 and utp wire.  Maybe it
>> would.  Maybe I am just buying a piece of wire with two connectors on the
>> ends.
>>
>>
>>
>> The controller it plugs into is $2000 so I don’t want to experiment on
>> that.  Be interesting to see the adapter cable when it gets here.  See if
>> there are any active components.  I would have probably just wired it up to
>> a USB and tried it if my son had not made the modbus/RS485 comment.
>>
>>
>>
>> Any guesses?
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to