Yeah all one or the other.
On 8/18/2020 12:41 PM, Sean Heskett wrote:
everything has to be one or the other. no way to sync 2.5 and 5
together.
going to 5ms you should see about 10% boost in performance
On Tue, Aug 18, 2020 at 9:44 AM Sam Lambie <samtaos...@gmail.com
<mailto:samtaos...@gmail.com>> wrote:
I am replacing some 450 AP's with 450i so I can utilize 40mhz
channels and a little better throughput. Currently All my 450m AP
and 450 and 450i Ap's are synced to 15 miles, 75% and 6 contention
slots. Everything is happily humming along with these settings.
Easy enough to duplicate at 40mhz And call it good. But I like to
try to squeeze as much throughput as I can out my network.
With the replacement, I am curious if I were to go to 5 ms frames
on the AP's, how the heck do I sync the settings? It seems
impossible as the start and end Slots have basically doubled when
going to 5.0 ms frames.
I have within earshot of this site about 10- 450m AP's spread out
over 15-20 miles. They don't do 5.0 ms, so I am wondering if I am
going down a rabbit hole...
Has anyone colocated AP's with mixed frames? Does it work? I also
have 2 ePMP 2000 AP's at this site as well to add to the fun...
Thanks
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com <http://www.newmex.com>
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
