If you swung it just right at the back of the neck, you could snatch out the spinal cord. That would probably slow down you attacker.
From: Robert Sent: Saturday, July 11, 2020 2:27 PM To: af@af.afmug.com Subject: Re: [AFMUG] DIY HH Hooks Also handy for dragging victims along with you... On 7/11/20 12:18 PM, ch...@wbmfg.com wrote: I have been making my crew handhole hooks for some time. I came up with a real nice method. Buy one of these: https://www.raneystruckparts.com/chrome-31-fifth-wheel-pin-puller/?gclid=EAIaIQobChMIzYqByfLF6gIVC9vACh27nQcDEAQYASABEgJ8wPD_BwE Local truck stops frequently stock them. Put the hook end in a vice and put a large box end wrench or a pipe wrench over the T handle and twist it 90 degrees. Then, with the vice, open the hook up about maybe 30 degrees. Not too much but more than it is stock. Then take an angle or bench grinder and put a chisel point on it so you can whack it into the slot that is always full of dirt. You might also grind the sides a bit to narrow them. They are light and easy to throw in the trunk of a car or behind a pickup seat. Cheap enough that everyone can have one. And super easy to make if you should lose or break one. Have not broke one yet. The cheaper ones don't have the little leg sticking out the back. Sometimes that leg is nice to push a lid back into place. -------------------------------------------------------------------------------- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
