Fiber and power cables only plus gps feeding off the aux port works fine. Jon Langeler Michwave Technologies, Inc.
> On Jun 25, 2020, at 10:34 PM, Ken Hohhof <af...@kwisp.com> wrote: > > > What am I missing? Is it not possible to do inband management over the fiber? > > From: AF <af-boun...@af.afmug.com> On Behalf Of Forrest Christian (List > Account) > Sent: Thursday, June 25, 2020 9:05 PM > To: AnimalFarm Microwave Users Group <af@af.afmug.com> > Subject: Re: [AFMUG] [ External ] Re: Syncinjector cambium sync with 3ghz 450m > > You generally want the CAT5 cable in place for management. > > And yes, aux port does work.... > > And the technology you're looking for for over the ethernet is ieee 1588. > The problem is likely costs... > > On Thu, Jun 25, 2020 at 8:02 PM Ken Hohhof <af...@kwisp.com> wrote: > Seems like there should be a way to pass sync over the fiber. But doing 10 > seconds of reading on SyncE, that doesn’t look like it. > > I assume AUX port sync is also an option? Maybe that’s preferable to running > an extra Cat5 cable up the tower just to transport a 1 pps signal. > > > From: AF <af-boun...@af.afmug.com> On Behalf Of Matt Mangriotis via AF > Sent: Thursday, June 25, 2020 7:13 PM > To: AnimalFarm Microwave Users Group <af@af.afmug.com> > Cc: Matt Mangriotis <matt.mangrio...@cambiumnetworks.com> > Subject: Re: [AFMUG] [ External ] Re: Syncinjector cambium sync with 3ghz 450m > > Sorry I didn’t see this earlier Steve… this second link is the one I would > have pointed you too. > > Matt > > From: AF <af-boun...@af.afmug.com> On Behalf Of Steve Jones > Sent: Thursday, June 25, 2020 3:51 PM > To: AnimalFarm Microwave Users Group <af@af.afmug.com> > Subject: [ External ] Re: [AFMUG] Syncinjector cambium sync with 3ghz 450m > > double ha > https://community.cambiumnetworks.com/t5/PMP-Getting-Started/Installing-DC-LPU-and-Grounding-Kit-for-3-GHz-PMP-450m-Cambium/m-p/96487 > > > On Thu, Jun 25, 2020 at 3:49 PM Steve Jones <thatoneguyst...@gmail.com> wrote: > ha > https://community.cambiumnetworks.com/bstrc49894/attachments/bstrc49894/forums_pmp_450/7434/1/3%20GHz%20450m%20power%20cam-10189_000v001.pdf > > On Thu, Jun 25, 2020 at 3:45 PM Steve Jones <thatoneguyst...@gmail.com> wrote: > its a 4 pin connector, but im having a time finding the pinout, the power > supply is only 2 terminals > > On Thu, Jun 25, 2020 at 3:30 PM Josh Luthman <j...@imaginenetworksllc.com> > wrote: > Wait the 450m 3 GHz needs four conductors?! > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Thu, Jun 25, 2020 at 3:15 PM Matt Hopkins <mhopk...@onlinenw.com> wrote: > On the 5GHz 450M you can use one cable for power, sync, and data if you so > choose. > On the 3GHz 450M you have to use at least 2 cables. One will probably be cat5 > for sync and data. Power must have it's own 4 conductor cable. In the > RackInjector, you would be providing power over the sync port as well as the > power cable but the 450M will ignore the power input from the Cat5. The pic > below shows the end result. This is live from one of our towers. Note the > current on all the ports is minimal. > > <image001.png> > > > > On Thu, Jun 25, 2020 at 10:38 AM Steve Jones <thatoneguyst...@gmail.com> > wrote: > wont sending POE power to the radio damage the port?, syncinjectors are > passive poe > > On Thu, Jun 25, 2020 at 12:21 PM Eric Muehleisen <ericm...@gmail.com> wrote: > The RackInjector board naming scheme is confusing. He really needs a table > matrix that breaks down what boards support what equipment and what jumpers > and power requirements to use. I think this is why he was asking for help on > his documentation. > > Power Injection for Cambium Sync = 450M & 450i. > Power Injection + Canopy Sync = ePMP, 450 & 320 > > To power a 3ghz 450M you'll need a PDU card and a Power Injection for Cambium > Sync to provide sync pulse. No PoE on the 3.65ghz 450M. You leave power > enabled on the card/ports or sync will not work. > > > > On Thu, Jun 25, 2020 at 11:46 AM Steve Jones <thatoneguyst...@gmail.com> > wrote: > Im confused as shit, and the cambium documentation is not clear. The > syncinjector cambium sync says 450m, but is the only 450m 5ghz? the 3ghz as > bestI can tell is a DC only product (even says something about sync over > power) > > so will the syncinjector still provide sync at the ethernet port, i just turn > off the power output on the syncinjector? or am i misunderstanding this and > the 450m 3ghz will take power via the ethernet port? > > forrest? > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > - Forrest > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
