Still some flicker at about 30% load.
From: Chris Fabien
Sent: Monday, June 22, 2020 2:55 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] OT generator stabilizer
It will probably look like a clean sine wave but there is a control loop in the
voltage regulator that adjusts the field voltage to generate the correct output
voltage. That loop has some instability under zero load, that's what it sounds
like to me anyway.
On Mon, Jun 22, 2020 at 3:57 PM Josh Luthman <j...@imaginenetworksllc.com>
wrote:
We just said screw it and did 12vdc (12v LED, battery) charge the battery via
trailer cable.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Mon, Jun 22, 2020 at 1:26 PM <ch...@wbmfg.com> wrote:
Brand new splicing trailer. Just finishing it up.
Put in florescent looking fixtures that are actually LED.
They flicker with the generator power.
I am going to try to put caps on the output of the LED ballasts...
But what is the best way to stabilize the output of the generator?
I am going to put a scope on the output and see what it looks like.
I turned on the air conditioner and the flickering reduced, so it is low
load causing it.
But this is after an electronic LED driver which should regulate out the AC
line issues I would thing.
Odd...
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
