Do you put your own ends on it or just use the length you bought?

From: Josh Luthman 
Sent: Friday, June 5, 2020 7:38 AM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] Internal fiber

>From the NID to the 844G?  We do exactly this with mdc-jj1f-0050f0


Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Thu, Jun 4, 2020 at 12:10 PM <ch...@wbmfg.com> wrote:

  I am not using ONTs in the classic sense.  The 844G router is the ONT.  
  Trying to attach as little to the outside of the house as possible.  

  From: Sterling Jacobson 
  Sent: Thursday, June 4, 2020 9:45 AM
  To: AnimalFarm Microwave Users Group 
  Subject: Re: [AFMUG] Internal fiber

  I assume this is not new construction.



  In my limited use cases I’ve used armored jump cables from the outside 
mini-nid join box to the inside.

  Then loop it a couple of times, maybe behind the ONT even, secured to the 
wall or whatever, then just a bit is exposed to the plug.

  Or just went ahead and used a NID inside with the usual strain guards and 
even boots or mini conduit etc.



  New CenturyLink builds I’ve noticed have a flexible mini duct/conduit, then 
loop the jump cable coming out of that behind the ONT and connect it on the 
bottom so not much is exposed.



  From: AF <af-boun...@af.afmug.com> On Behalf Of ch...@wbmfg.com
  Sent: Thursday, June 4, 2020 9:24 AM
  To: af@af.afmug.com
  Subject: [AFMUG] Internal fiber



  I am planning to run the fiber clear into the 844G router at each home.  

  But in the past when we have done this, we have had issues with people not 
understanding that the fiber is a bit more delicate than cat5.  Then there is 
the issue with the termination.  You can get long jumpers and splice outside in 
a small enclosure.  But replacing the end on the router is a bit more 
difficult.  I have used unicams in the past, but with my new system I am 
looking for something better.



  I really need something a bit tougher than jumpers to route through the 
house.  Anything like that exist?


------------------------------------------------------------------------------
  -- 
  AF mailing list
  AF@af.afmug.com
  http://af.afmug.com/mailman/listinfo/af_af.afmug.com

  -- 
  AF mailing list
  AF@af.afmug.com
  http://af.afmug.com/mailman/listinfo/af_af.afmug.com



--------------------------------------------------------------------------------
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to