We would typically replace the cable run although there is room in the NID and in that baseboard jack to fusion splice a pigtail in a pinch.
On Thu, Jun 4, 2020 at 12:48 PM <ch...@wbmfg.com> wrote: > This does help, thanks. What do you do when you have to re terminate the > Corning drop? > > *From:* Chris Fabien > *Sent:* Thursday, June 4, 2020 10:22 AM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] Internal fiber > > We use one of two options > > Corning RuggedDrop assembly, is a 5mm 1F tight buffered cable with SC/APC > on either end, outside rated in case you need to house wrap, we use this > from the NID to a baseboard jack. These are $25-35 range for 50-100ft > length. > > Fiberstore armored patch cables - 3mm with a blue PVC jacket, we use these > from the baseboard jack to the modem/ONU. Depending on the ONU you may need > a UPC to APC which is a custom item about a 1 month lead time. We've also > bought a similar cable from total cable solutions. About $5 for the FS and > only about $8.50 for the TCS. We have also bought longer ones of these to > use from NID to the baseboard jack, in cases when it will not be exposed to > UV, like right into the crawl space and then up into the living area. > > This is the baseboard jack we use: > http://www.ecablemart.com/terminal_box/2-fiber-86-type-ftth-terminal-box-p-119819.html > > Hope the helps > Chris > > > > On Thu, Jun 4, 2020 at 11:25 AM <ch...@wbmfg.com> wrote: > >> I am planning to run the fiber clear into the 844G router at each home. >> But in the past when we have done this, we have had issues with people >> not understanding that the fiber is a bit more delicate than cat5. Then >> there is the issue with the termination. You can get long jumpers and >> splice outside in a small enclosure. But replacing the end on the router >> is a bit more difficult. I have used unicams in the past, but with my new >> system I am looking for something better. >> >> I really need something a bit tougher than jumpers to route through the >> house. Anything like that exist? >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
