I dont think there is a default plug on the epmp 1k. Have to do the power sequence reset or the reset button
On Mon, May 18, 2020, 5:19 PM Sam Lambie <samtaos...@gmail.com> wrote: > No, the PMP100's will not respond to that address if it has been changed > to something else. You will need a default plug. > > On Mon, May 18, 2020 at 4:15 PM Ken Hohhof <af...@kwisp.com> wrote: > >> This is with a "default plug" inserted in the RJ12 port? >> >> -----Original Message----- >> From: AF <af-boun...@af.afmug.com> On Behalf Of Larry Smith >> Sent: Monday, May 18, 2020 5:06 PM >> To: AnimalFarm Microwave Users Group <af@af.afmug.com> >> Subject: Re: [AFMUG] Determine PMP100 IP >> >> At one time one of them (AP/SM) was 1.1 and the other was 1.2. >> Can't remember which or even what, but recall always checking both IP when >> "looking". >> >> -- >> Larry Smith >> lesm...@ecsis.net >> >> On Mon May 18 2020 16:51, Mike Hammett wrote: >> > I thought that 169.254.1.1 was fairly universal. Should a PMP100 AP >> > always respond to that IP? >> > >> > >> > >> > >> > ----- >> > Mike Hammett >> > Intelligent Computing Solutions >> > >> > Midwest Internet Exchange >> > >> > The Brothers WISP >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
