We did it for a long time to colocate our 100 caps with our 450 caps. Our last 5.7 100 series is gone and I don't think I have the settings recorded anymore. I know on the 450 we had to push link distance out to 14 miles (14/75%/2/2). If you use that in the link calc you should be able to find a pretty close match for the 100 series.
On Fri, May 15, 2020 at 9:20 AM Adam Moffett <dmmoff...@gmail.com> wrote: > 900mhz FSK = 5ms frame > > all other FSK = 2.5ms frame > > > On 5/15/2020 9:25 AM, Jeff Broadwick - Lists wrote: > > It can be done. You have to match the 450i sync timing to the FSK > timing. It’s either .25 or .5ms...I can never remember. > > Jeff Broadwick > CTIconnect > 312-205-2519 Office > 574-220-7826 Cell > jbroadw...@cticonnect.com > > On May 15, 2020, at 12:49 AM, Sean Heskett <af...@zirkel.us> > <af...@zirkel.us> wrote: > > > Is the PTP450i in the same band as the PMP100? > > > > On Thu, May 14, 2020 at 3:52 PM <cg...@graytechsoftware.com> wrote: > >> I have a PTP450i feeding a small site with a PMP100 AP. Is it possible to >> sync PTP450i and PMP100? Can I pull sync off the PTP450i slave into the >> PMP100 AP? >> >> >> >> Thank you - Chris >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
