Thats pretty sweet. We are looking for a 4 cable cat 5/6 due to some restrictions on one of our mutli site landlords
On Mon, Mar 2, 2020 at 10:13 AM Eric Muehleisen <ericm...@gmail.com> wrote: > We've had great results with Shireen's Hybrid cable. We've used it on a > bunch of Cambium 670 point to point installs. Planning on using it for our > 3ghz 450M. > > https://www.shireeninc.com/osc/dfp-1246-data-fiber-power-composite-cable > > On Mon, Mar 2, 2020 at 10:01 AM dave <dmilho...@wletc.com> wrote: > >> We do, >> We are using #14x4 UV rated power wire and using TAC2 SM LC-LC Fiber for >> each radio. Each radio also gets Superior Essex Armor Cat6 BBDGE cable for >> Timing and POE in case of 5Ghz. >> U could get custom cables made from Best-tronics that have 4 wire#14 with >> a pair of Fibers. That is my next move is to approach them about such a >> solution but for >> now we are running them separate. The Tac2 type of fiber has a Kevlar >> jacket which is used a lot in DOD. >> If your Cat 6 Jumper is over 6' consider using Ground kit. We ground >> everything! >> >> We also have a design to re-purpose the CMM4 enclosures using Dinrail and >> Packetflux >> >> >> >> On 3/2/20 9:29 AM, Josh Baird wrote: >> >> Do you have a solution for fiber+power to each radio? We're looking at a >> few different options right now.. >> >> On Mon, Mar 2, 2020 at 10:26 AM dave <dmilho...@wletc.com> wrote: >> >>> We have a few cmm5 in service and had absolutely no issues with them and >>> yes pricey for sure but havent went to a site for a cmm5 issue ever. >>> Cmm4 did what it was designed to do and we still have a couple in >>> service. If I had learned to ground them properly I would not of had to >>> replace any of them as with any >>> thing you put on a tower. >>> They were of course only 100baseT where CMM5 is GigE. >>> Ive been looking at chucks Gige APC gas tube surge arrestor for a new >>> project we have and looks like a good replacement for the APC444HV version. >>> >>> I liked the CMM4 for its Outdoor verison and classy nema box that could >>> be mounted on a tower but cmm5 there isnt any way to do such unless the box >>> is >>> 3'x3'x12" which is lil too big for my taste at 150' on a tower. >>> We pay close attention to what the cellcos are doing with their squid >>> and power/fiber distribution. >>> >>> >>> >>> On 2/27/20 3:32 PM, Sean Heskett wrote: >>> >>> CMM5 is worse than the CMM4. >>> >>> and yes the control board for the CMM5 is a Pi >>> >>> -sean >>> >>> >>> On Thu, Feb 27, 2020 at 12:44 PM Josh Baird <joshba...@gmail.com> wrote: >>> >>>> Yes, the CMM4 was horrible. We still have a few as well. >>>> >>>> On Thu, Feb 27, 2020 at 2:38 PM Steve Jones <thatoneguyst...@gmail.com> >>>> wrote: >>>> >>>>> CMM Micro was pretty cool. We dropped the coin for a few CMM4 (still >>>>> have one NIB) and were sorely disappointed in what a shitshow it was of >>>>> cobbled components at crazy high cost, half web interface, half CLI, and >>>>> IIRC there was java involved too. I wont even look at a CMM5 >>>>> >>>>> On Thu, Feb 27, 2020 at 1:26 PM Josh Baird <joshba...@gmail.com> >>>>> wrote: >>>>> >>>>>> Was it the CMM5 that was basically a big metal box with a tiny >>>>>> Raspberry Pi in it? >>>>>> >>>>>> On Thu, Feb 27, 2020 at 2:21 PM Sean Heskett <af...@zirkel.us> wrote: >>>>>> >>>>>>> We use the PacketFlux rack injector - great product and easy to use >>>>>>> for lots of different equipment types. >>>>>>> >>>>>>> We ripped out all of our CMM5s because honestly they are a PITA and >>>>>>> a very clunky solution. >>>>>>> >>>>>>> -Sean >>>>>>> >>>>>>> >>>>>>> On Thu, Feb 27, 2020 at 11:09 AM Shayne Lebrun < >>>>>>> sleb...@corebroadband.ca> wrote: >>>>>>> >>>>>>>> What are the various options for providing sync to a 3.65 450M? >>>>>>>> -- >>>>>>>> AF mailing list >>>>>>>> AF@af.afmug.com >>>>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>>>> >>>>>>> -- >>>>>>> AF mailing list >>>>>>> AF@af.afmug.com >>>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>>> >>>>>> -- >>>>>> AF mailing list >>>>>> AF@af.afmug.com >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
