One very nice feature of the Cambium solution is (with some caveats) you can just turn off CBRS mode in the AP and all the SM’s go back to normal NN licensed operation.
The caveats: You have to have the frequencies, channel widths, color codes, etc. enabled in the SM’s for them to be able to ’see’ the AP when it comes up in legacy NN modes. Obviously the frequencies need to be in 3650-3700 and with appropriate power levels set. I’m told you may need to toggle the AP in/out of CBRS and extra time in cnMaestro but that appears to be something we have only seen a few times so far when transitioning in/out of CBRS modes. Mark > On Jan 30, 2020, at 2:21 PM, Ken Hohhof <af...@kwisp.com> wrote: > > I see there’s a beta 4 release today. Haven’t read the release notes yet. > > From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com>> On Behalf > Of Sean Heskett > Sent: Thursday, January 30, 2020 12:24 PM > To: AnimalFarm Microwave Users Group <af@af.afmug.com > <mailto:af@af.afmug.com>> > Subject: Re: [AFMUG] CBRS SAS options from Cambium > > We also found a big with one Medusa AP that wouldn’t get sync even tho the > sync status showed cambium sync and timing port sync. Solution was to turn > on ‘auto-sync + free-run’ and then also enable ‘free run before gps sync’ > still working with cambium on a better fix but it’s working for now. > > On Thu, Jan 30, 2020 at 10:54 AM Mark Radabaugh <m...@amplex.net > <mailto:m...@amplex.net>> wrote: >> It has bugs, that’s for sure - but it’s workable. >> >> Turn off ‘spectrum scan on startup’ if you enable CBSD. It goes into an >> endless loop in this beta. That’s probably the worst bug we have found. >> >> Mark >> >> Mark Radabaugh >> Amplex >> 22690 Pemberville Rd >> <https://www.google.com/maps/search/22690+Pemberville+Rd+Luckey,+OH+43443?entry=gmail&source=g> >> Luckey, OH 43443 >> <https://www.google.com/maps/search/22690+Pemberville+Rd+Luckey,+OH+43443?entry=gmail&source=g> >> 419-261-5996 >> >> >>> On Jan 30, 2020, at 12:15 PM, Ken Hohhof <af...@kwisp.com >>> <mailto:af...@kwisp.com>> wrote: >>> >>> >>> Mark, how worried are you about the 450 firmware still being beta? >>> >>> From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com>> On >>> Behalf Of Mark Radabaugh >>> Sent: Thursday, January 30, 2020 10:35 AM >>> To: AnimalFarm Microwave Users Group <af@af.afmug.com >>> <mailto:af@af.afmug.com>> >>> Subject: Re: [AFMUG] CBRS SAS options from Cambium >>> >>> We have it up and running happily. Just converted this site today: >>> >>> <image001.png> >> >>> >>> You can pick the SAS you want to use with cnMaestro but the default option >>> is Federated, but they will let you work with the other SAS vendors if you >>> prefer. You have to use cnMaestro (either on or off premise) to serve as >>> the proxy to communicate with the SAS - that’s just part of how the system >>> works. >>> >>> If Cambium support isn’t working with you on it contact your regional >>> Cambium sales manager. If that doesn’t work it’s not too hard to find >>> your way up the Cambium organization until you get results. >>> https://www.cambiumnetworks.com/our-company/executive-team/ >>> <https://www.cambiumnetworks.com/our-company/executive-team/> is the list. >>> Cambium follows the first.l...@cambiumnetworks.com >>> <mailto:first.l...@cambiumnetworks.com>format for email addresses. Start >>> with the CSM and escalate as needed. >>> >>> Mark >>> >>> >>> >>> >>>> On Jan 30, 2020, at 11:25 AM, David Coudron <david.coud...@advantenon.com >>>> <mailto:david.coud...@advantenon.com>> wrote: >>>> >>>> Interested to know what folks are doing or planning to do who have Cambium >>>> PMP 450 3.65 equipment in the field. It is our understanding that >>>> Cambium is the only SAS option we have due to the need to have cnMaestro >>>> be the Domain Proxy for the SAS. Has anyone got this up and working? >>>> We have been requesting access to the CBRS options in cnMaestro for two >>>> weeks but are not making much progress. With full commercial >>>> availability, we are a little surprised that this isn’t available. Are >>>> there other options for connecting to a SAS other than using Cambium as >>>> the SAS Domain Proxy? Seems they might not be ready for this, or are not >>>> heavily committed to it. >>>> >>>> Regards, >>>> >>>> David Coudron >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com <mailto:AF@af.afmug.com> >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com <mailto:AF@af.afmug.com> >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com> >> -- >> AF mailing list >> AF@af.afmug.com <mailto:AF@af.afmug.com> >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> <http://af.afmug.com/mailman/listinfo/af_af.afmug.com>-- > AF mailing list > AF@af.afmug.com <mailto:AF@af.afmug.com> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > <http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
