Your is a much better test than trying to first suck water through it like a straw, which has been done…..and then proven to sustain a PRESSURE test by trying to blow bubbles on both ends… we are very serious about our technology.
From: AF <af-boun...@af.afmug.com> On Behalf Of Eric Muehleisen Sent: Wednesday, January 29, 2020 12:34 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Cat5 Water Blocking Dry Tape Same. We attached a funnel full of water to the end of a 2ft chuck of DC-1042. Left it for 24 hours expecting water to drip out the bottom. Never did. We started using it exclusively on our towers for the last 2 years. Not a single issue. On Wed, Jan 29, 2020 at 11:29 AM Adam Moffett <dmmoff...@gmail.com <mailto:dmmoff...@gmail.com> > wrote: I remember dropping a chunk of that tape into a glass of water and waiting for something to happen. Maybe I didn't wait long enough, but nothing happened. On 1/29/2020 11:59 AM, g...@shireeninc.com <mailto:g...@shireeninc.com> wrote: > The chemical reaction is pretty simple > When chemical compound of 2 Hydrogen and 1 Oxygen atoms are present and > come in contact to our (Non Caustic, Non-Woven, Super Swelling Polyester > Bonding Material*) better known as "No-conductive water blocking tape" > > The following parametric occurs: > > Thickness [mm] 0.2 0.25 > Weigh[g/m2] 80 90 > Swelling height [mm] ?12 ?14 > Swelling speed[mm/1st min] ?10 ?10 > Tensile strength[N/15mm] ?45 ?50 > > Because of our Jacket composition, no change in OD has been observed. > Because of the non-causticity, no damage has been observed to the 4 pairs > insulation nor the solid 24 and 23 AWG copper core itself > > > Thanks for your attention. > > > -----Original Message----- > From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On > Behalf Of Matt > Sent: Wednesday, January 29, 2020 9:56 AM > To: AnimalFarm Microwave Users Group <af@af.afmug.com > <mailto:af@af.afmug.com> > > Subject: Re: [AFMUG] Cat5 Water Blocking Dry Tape > > So how does dry tape work anyway? I assumed it had some dry powder type > glue in it and when exposed to water absorbed and cured blocking further > passage of water? But not at all sure? > > -- > AF mailing list > AF@af.afmug.com <mailto:AF@af.afmug.com> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
