why not an EZ-Trencher? or are you needing to go deeper than that?

On Wed, Jan 29, 2020 at 4:26 AM Steven Kenney <st...@wavedirect.org> wrote:

> Looks about the size I was talking about.  Small enough to fit into a work
> van.  But powerful enough to do the job.
>
> --
> Steven Kenney
> Network Operations Manager
> WaveDirect Telecommunications
> http://www.wavedirect.net
> (519)737-WAVE (9283)
>
> ------------------------------
> *From: *"Jim Bouse [Brazos WiFi]" <j...@brazoswifi.com>
> *To: *"af" <af@af.afmug.com>
> *Sent: *Tuesday, January 28, 2020 2:39:23 PM
> *Subject: *Re: [AFMUG] Trencher
>
> I think that is going to vary depending on how much you use it.
>
> We have a Ditch Witch SX100.  Good little machine for 4-6” depth.  We have
> probably only run it 100 hours so far.
> We also have a Ditch Witch 4010DD with the plow attachment.  It has about
> 2000 hours on it and required a bit of work to get it back to good after
> purchase.
>
> Overall, I think they are decent machines for what they do.
>
>
>
> Jim Bouse
> Owner - Brazos WiFi
> 979-985-5912
> http://www.brazoswifi.com
>
>
>
> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Steven Kenney
> *Sent:* Tuesday, January 28, 2020 1:13 PM
> *To:* af@af.afmug.com
> *Subject:* [AFMUG] Trencher
>
>
>
> We are looking to buy a trencher.  The vibrating type... however from what
> we've been told by many people they require constant maintenance because of
> the vibrations.  Things are always falling apart.
>
>
>
> Has anyone had any good luck with trenchers that are well built and will
> last more than a few years? If so which brand?
>
>
>
> --
> Steven Kenney
> Network Operations Manager
> WaveDirect Telecommunications
> http://www.wavedirect.net
> (519)737-WAVE (9283)
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to