Offer an alternative. We offer Calix 844 and 804's as required for the house. Let's us keep close control on frequencies used in the house and has reduced calls to almost nothing for "router issues"
On Fri, Dec 13, 2019 at 2:03 PM Steve Jones <thatoneguyst...@gmail.com> wrote: > wasnt it a big deal to tamper with a phone too? > > On Fri, Dec 13, 2019 at 3:39 PM Trey Scarborough <t...@3dsc.co> wrote: > >> No because you didn't own the phone the phone company did and they sent >> someone out to install it and charged you monthly for it... >> On 12/13/2019 3:25 PM, Nate Burke wrote: >> >> I've only run into the google WIFI system at a customer once. Luckily it >> wasn't interfering with the feed. Whenever a customer asks, I tell them to >> get any system except for the google one. >> >> But the guy at the store told them that they just needed to put a puck in >> their steel outbuilding 1000' away from the house, and the WIFI would work >> just fine out there. When the telephone was first invented, were there >> these same problems? 'I nailed the crank phone on the wall of the outhouse >> out back, but Martha can only hear me in the kitchen when I yell into it, >> and then only when the kitchen window is open.' >> >> On 12/13/2019 2:32 PM, Ken Hohhof wrote: >> >> Has anyone figured out a solution to interference with Google WiFi at >> customers fed via 5 GHz? >> >> >> >> We have found it to be an unsolvable problem due to: >> >> >> >> 1) Google does not let you set the frequencies >> >> 2) Google does not let you set the channel width (and therefore >> presumably uses 80 MHz channels) >> >> 3) The mesh system presumably uses additional spectrum for the backhaul >> between pucks >> >> 4) Most customers put in 3 of them, virtually guaranteeing at least 1 of >> them will be right near the dish to the tower >> >> 5) Many customers also figure they can put them in outbuildings to get >> service to their shop, barn, etc. (one customer today intended to put one >> in his wife’s “she-shed”) >> >> >> >> With any other router we just set the channel to a U-NII-1 or DFS >> channel. We have a fair amount of 3.65 GHz in our network and then it >> isn’t a problem, but the majority is still 5 GHz. >> >> >> >> -- >> >> Trey Scarborough >> VP Engineering >> 3DS Communications LLC >> p:9729741539 >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
