Hi Daniel;
Thanks for the suggestion. That really looks like a possible
solution. Do you know if this require some controller or can operate
standalone. As I figure Ubiquiti Unifi series requires some type of
cloud-based or on-premise controller or something.
Linc
On 06/11/2019 3:06 PM, Daniel White wrote:
I've never used these but I would give them a try for this application:
https://www.ui.com/unifi-switching/unifi-switch-flex/
photograph
Daniel White
Co-Founder & Managing Director of Operations
phone: +1 (702) 470-2766
direct:+1 (702) 470-2770
Lincs_Chel wrote on 11/5/19 23:22:
Hi;
Working on a project that requires the use of a couple 4-port
(minimum) switches to be installed outdoors. Kindly note that these
won't be in any snow and/or ice cold environment. Think Florida and
more specifically South Florida type weather conditions.
Some may have an opportunity to be installed inside at the bottom of
the lamp post. The cavities inside (at the bottom) are large enough
to hold a basic 4-8 port switch. Some may need to be mounted in a
NEMA4 enclosure.
Additional Options:-
1) both PoE and non-POE would be great.
2) SNMP or management
3) AC or POE powered.
4) Don't need fibre. This will only be a CAT5/CAT6 copper based
solution.
In one of the runs, I will need to uplink or connect at least three
(3) in series. So, if it is powered via POE, then it will also need
to provide POE for the next switch in series.
Any suggestions.
Regards.
LH
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
