Yeah might be I'm stupid. VLAN's and port isolation are a breeze on
Cisco. I found CRS counter-intuitive. Maybe it's just me.
On 10/18/2019 2:33 PM, dave via AF wrote:
I have a few CRS328 ans love them and configuring vlans is cake even
port isolation.
Work with cisco before which was like breathing to me when doing vlans
and other port isolation techniques.
I think one must really understand each manufacture on how they name a
feature and understand the how and
why of vlans.
On 10/18/19 9:55 AM, Adam Moffett wrote:
I have some opinions on this.
1) Yes they're cheap.
2) They run ROS, so if a newb comes along who doesn't realize that
this is switch hardware and it has a crappy CPU, then that newb might
try to make firewall rules and VPN tunnels and other such router
functionality in the config. That will be a mistake because the CPU
is weak and you will get crappy performance. Leave it as an L2
switch and the performance is perfectly fine.
3) Configuring L2 functions on the switch menu in ROS is obtuse.
I've messed with VLAN's, port isolation, and port mirroring. It's
all strangely difficult to understand and use.
4) I've had them just decide one day that they'll stop forwarding
packets to one or more interfaces and then "fixed" them with a
reboot. I've also had them sit there and do their thing as a basic
managed switch for several years with no issue.
I would not use them for critical infrastructure anymore, but a
switch with a small form factor and extended operating temperature
spec generally costs several times what the CRS costs so I'd still
consider it for the right circumstance. I can't tell you what the
right circumstance is. That's your call.
On 10/18/2019 10:39 AM, Steve Jones wrote:
We usually use the lower end HP procurve switches, we have had zero
problems with them over the years, but now theyre office connect and
seem that all the 24 port ones are going deep instead of 10 inches.
The CRS stuff is 1/2 to 1/3 the cost of comparable HP switches.
Have any of you degenerates used these very much and stayed with
them? We route with mikrotiks so we are aware of the mikrotik funky
stuff, the cost offsets those
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com