Matt,
Did you have any success with the AF11/CPR90G interface? If so can you share the recipe? We have a customer that is looking at Chuck's adapter for a VHLP3-11W-6WH/A (with CPR90G) but isn't sure if it will solve their issue. Thanks, Mike Black Black & Associates 727-773-9016 www.bamicrowave.com logo.png black & associates Frequency Coordination ● FCC Licensing ● Engineering Design -----Original Message----- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of ch...@wbmfg.com Sent: Friday, November 16, 2018 4:17 PM To: af@af.afmug.com Subject: Re: [AFMUG] AirFiber11 and CPR90G Input I have an AF11x adapter for that antenna. -----Original Message----- From: Matt Sent: Friday, November 16, 2018 9:19 AM To: af@af.afmug.com Subject: Re: [AFMUG] AirFiber11 and CPR90G Input Not sure. Here is diagram that I think is similar. https://www.commscope.com/catalog/doc/pdf/7656 On Thu, Nov 15, 2018 at 10:24 AM <ch...@wbmfg.com> wrote: > > Is the feed tube clear out to the dielectric lens feed at the focal point > of > the parabola round or rectangular? > If it is round, then there is a rectangular to round transition somewhere > at > the back of the antenna. Those can be replaced to do dual pol. > > -----Original Message----- > From: Matt > Sent: Thursday, November 15, 2018 9:15 AM > To: af@af.afmug.com > Subject: Re: [AFMUG] AirFiber11 and CPR90G Input > > Its looking like I need a different feedhorn that has separate > horizontal and vertical CPR90G connections. Current feedhorn is > single pole. What I cannot believe is that those CPR90G to N adapters > are over $400 each. > > On Wed, Nov 14, 2018 at 10:57 AM <ch...@wbmfg.com> wrote: > > > > https://www.pasternack.com/images/ProductPDF/PE9836.pdf > > > > But that is a rectangular waveguide adapter and will not allow dual pol. > > Does your antenna have a circular or rectangular waveguide? Got a > > photo? > > > > -----Original Message----- > > From: Matt > > Sent: Wednesday, November 14, 2018 9:48 AM > > To: af@af.afmug.com > > Subject: Re: [AFMUG] AirFiber11 and CPR90G Input > > > > Anyone found such adapters anywhere? > > On Tue, Nov 13, 2018 at 5:17 PM Tim Hardy <thardy...@gmail.com> wrote: > > > > > > VHLP - ValuLine > > > > > > Sent from my iPad > > > > > > > On Nov 13, 2018, at 6:08 PM, <ch...@wbmfg.com> <ch...@wbmfg.com> > > > > wrote: > > > > > > > > I just made adapters for the VLP (I think). Terribly slow in > > > > getting > > > > them out. > > > > (Also working Exalt). > > > > > > > > -----Original Message----- From: Matt > > > > Sent: Tuesday, November 13, 2018 3:03 PM > > > > To: af@af.afmug.com > > > > Subject: [AFMUG] AirFiber11 and CPR90G Input > > > > > > > > Has anyone connected and AirFiber11 to an Andrew dish with a CPR90G > > > > connection and used both polarities? > > > > > > > > -- > > > > AF mailing list > > > > AF@af.afmug.com > > > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > > > > -- > > > > AF mailing list > > > > AF@af.afmug.com > > > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > > -- > > > AF mailing list > > > AF@af.afmug.com > > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > -- > > AF mailing list > > AF@af.afmug.com > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > > -- > > AF mailing list > > AF@af.afmug.com > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
