There are lots of 1U power distribution panels avail. With fuses or CBS. Sent from my iPhone
> On Sep 17, 2019, at 10:58 AM, Carl Peterson <cpeter...@portnetworks.com> > wrote: > > I know I should have a breaker, but I only have one output breaker and am > looking for a way to add one. i.e a1U chassis I could run a feed to and plug > in a few breakers. (like a fused dist panel but with say four breaker > positions) > >> On Tue, Sep 17, 2019 at 11:44 AM Chuck McCown <ch...@wbmfg.com> wrote: >> My eltek has 4 breaker positions. Yes I would certainly want a breaker on >> that second line. >> >> Sent from my iPhone >> >> > On Sep 17, 2019, at 8:57 AM, Carl Peterson <cpeter...@portnetworks.com> >> > wrote: >> > >> > I normally run #6 from an indoor rectifier/battery setup. The Eltek has >> > one output lug on a breaker with a common return plate. We have a >> > building that has two towers and we have an outdoor enclosure on each >> > tower so I need to run a second remote distribution panel. I could just >> > bolt a second lug on top of the first lug, but it seems to be these should >> > each be on their own breaker. is three any sort of rack mount breaker, >> > inline fuse holder with lugs, etc that I could add to each feed? >> > <Screen Shot 2019-09-17 at 9.52.09 AM.png> >> > >> > -- >> > AF mailing list >> > AF@af.afmug.com >> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > Carl Peterson > > PORT NETWORKS > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
