Thanks George! -----Original Message----- From: AF <af-boun...@af.afmug.com> On Behalf Of George Skorup Sent: Monday, September 9, 2019 11:10 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] MTU settings on CFIP Lumina FODU - v2.71.07
I'm logged into a Lumina and don't see anything special. I don't think there are any settings, because it's just a managed switch with a stated max frame size. On Mon, Sep 9, 2019 at 9:34 PM Paul McCall <pa...@pdmnet.net> wrote: > > Natively, without any settings? > > -----Original Message----- > From: AF <af-boun...@af.afmug.com> On Behalf Of George Skorup > Sent: Monday, September 9, 2019 10:32 PM > To: AnimalFarm Microwave Users Group <af@af.afmug.com> > Subject: Re: [AFMUG] MTU settings on CFIP Lumina FODU - v2.71.07 > > I believe the Lumina supports 9600-byte jumbo frames. > > On Mon, Sep 9, 2019 at 8:55 PM Paul McCall <pa...@pdmnet.net> wrote: > > > > We have some SAF CFIP Lumina FODU - v2.71.07 that I am wanting to verify > > the MTU settings on. Looking to make sure that the MTU is 2000 or better. > > > > > > > > Not seeing an option for it in the firmware. I know this is probably old > > firmware but its been running for years so we haven’t messed with it. > > > > > > > > Anybody have insight as to their MTU settings? > > > > > > > > Paul > > > > > > > > Paul McCall, President > > > > Florida Broadband / PDMNet > > > > 658 Old Dixie Highway > > > > Vero Beach, FL 32962 > > > > 772-564-6800 > > > > > > > > -- > > AF mailing list > > AF@af.afmug.com > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
