Meanwell SD series is widely reported as defective. They can't handle any inrush current without going offline without an auto recovery FYI.
On Thu, Jul 11, 2019 at 10:06 PM Forrest Christian (List Account) < li...@packetflux.com> wrote: > If you're willing to burn up around 20-40W of power you could also add a > high voltage linear regulator. Or a couple of diodes in series. > However, all of those will turn the excess voltage into heat, which is > what the 20-40W is... 2V@10A=20W. > > For The amount you're talking about power wise, the meanwell SD series is > probably your best bet. Almost all of the meanwell supplies have a din > bracket mounting adapter available, although I'm not finding the one for > these. The RSD series definitely has one but only goes up to around 350W. > > On Thu, Jul 11, 2019 at 3:00 PM Sterling Jacobson <sterl...@avative.net> > wrote: > >> Sorry to beat a dead horse, but I’m still stuck on this mini-pop DC plant >> thing. >> >> >> >> Is there a DIN mountable voltage regulator that will allow me to feed >> load from 48v battery string without going over 50v at 6-10A? >> >> >> >> I’m still trying to power a couple of MetroLinq 2.5 antennas at the site, >> but people tell me they explode if given more than say 52v. >> >> >> >> Which means my float battery system will kill the radios if it goes into >> recharge mode at 54v? >> >> >> >> Or am I overthinking things? >> >> >> >> Looks like to solve this I would need something like Mean Well $100 >> SD-350B-48 between the battery array and the load to assure it sticks >> around 50v. >> >> >> >> Is that my only solution here? >> >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > - Forrest > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
