Yeah, that seems a little goofy. just use a 5/16" or 8mm open end wrench, and just go like half a turn past finger tight... it's not like it needs to be very precise .
On Tue, Jul 2, 2019 at 2:11 PM Ken Hohhof <af...@kwisp.com> wrote: > What's the problem just using an ordinary 8 mm open end wrench? So you > don't over torque them? They just need to be a little more than finger > tight. Is over tightening really a problem? My issue with SMA connectors > is usually weatherproofing them. > > -----Original Message----- > From: AF <af-boun...@af.afmug.com> On Behalf Of Caleb Knauer > Sent: Tuesday, July 2, 2019 1:37 PM > To: AnimalFarm Microwave Users Group <af@af.afmug.com> > Subject: [AFMUG] Bendable single use SMA torque wrench > > Any seen anything like this before? Bendable, single use SMA torque > wrench. Trying to track down for a client and my google-fu is failing me. > Pic attached. > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
