Exalt is totally dead AFAIK; Star Microwave, which used to do their tech support, still does some support, and has some spare equipment. If you need Exalt radio firmware updates or datasheets I have good stock of that for a few product series.
I have never had good luck with Exalt XPIC. You may want to do a complete reboot of both radios and both ends at the same time, On Wed, Feb 6, 2019 at 11:11 AM Sam Lambie <[email protected]> wrote: > Is it true that Exalt is totally dead? I am having issues with a set of > Extend AIR XPIC radios and can't figure out if it is interference or radio > failure. > Anyone have suggestions? The radios are showing Modulation Mode 1 = 0 bits > of traffic on the downlink. > The other set is showing Mode 6 =598 mbps. But we rebooted the "bad" set > and the "good" set went wonky, and the "bad" set works fine now..... > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
