Its looking like I need a different feedhorn that has separate horizontal and vertical CPR90G connections. Current feedhorn is single pole. What I cannot believe is that those CPR90G to N adapters are over $400 each.
On Wed, Nov 14, 2018 at 10:57 AM <ch...@wbmfg.com> wrote: > > https://www.pasternack.com/images/ProductPDF/PE9836.pdf > > But that is a rectangular waveguide adapter and will not allow dual pol. > Does your antenna have a circular or rectangular waveguide? Got a photo? > > -----Original Message----- > From: Matt > Sent: Wednesday, November 14, 2018 9:48 AM > To: af@af.afmug.com > Subject: Re: [AFMUG] AirFiber11 and CPR90G Input > > Anyone found such adapters anywhere? > On Tue, Nov 13, 2018 at 5:17 PM Tim Hardy <thardy...@gmail.com> wrote: > > > > VHLP - ValuLine > > > > Sent from my iPad > > > > > On Nov 13, 2018, at 6:08 PM, <ch...@wbmfg.com> <ch...@wbmfg.com> wrote: > > > > > > I just made adapters for the VLP (I think). Terribly slow in getting > > > them out. > > > (Also working Exalt). > > > > > > -----Original Message----- From: Matt > > > Sent: Tuesday, November 13, 2018 3:03 PM > > > To: af@af.afmug.com > > > Subject: [AFMUG] AirFiber11 and CPR90G Input > > > > > > Has anyone connected and AirFiber11 to an Andrew dish with a CPR90G > > > connection and used both polarities? > > > > > > -- > > > AF mailing list > > > AF@af.afmug.com > > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > > -- > > > AF mailing list > > > AF@af.afmug.com > > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > -- > > AF mailing list > > AF@af.afmug.com > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
