Wow, they’ve bought a bunch of companies. I didn’t realize they bought ShowMe Cables. And I see KPP, Transtector and Polyphaser on the list.
From: AF <af-boun...@af.afmug.com> On Behalf Of Josh Luthman Sent: Wednesday, November 7, 2018 12:58 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Custom AF11 Coax https://www.infiniteelectronics.com/ Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Nov 7, 2018 at 1:50 PM, Ken Hohhof <af...@kwisp.com <mailto:af...@kwisp.com> > wrote: Didn’t the same company that bought L-Com also buy Pasternack? Maybe I’m remembering wrong. But they may have consolidated their sales. From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf Of Nate Burke Sent: Wednesday, November 7, 2018 12:44 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com <mailto:af@af.afmug.com> > Subject: Re: [AFMUG] Custom AF11 Coax Supposedly he went and ask engineering and that is what they told him. He initially tried to put me into an LMR cable with normal N Connectors, and Engineering told him that wouldn't work. On 11/7/2018 12:01 PM, Adam Moffett wrote: I think you got unlucky with that rep.... On 11/7/2018 12:50 PM, Nate Burke wrote: Good call with Pasternack, a 3' cable will be about $250 (part# PE345) and is not outdoor rated. He claimed that no coax at that frequency is outdoor rated. I wonder if the blue UBNT Cables with the dish are.... On 11/7/2018 11:14 AM, Eric Kuhnke wrote: They're a special series of N connectors rated for up to 13 GHz. Could probably buy new prefab cables from Pasternack. On Tue, Nov 6, 2018 at 2:18 PM Nate Burke <n...@blastcomm.com <mailto:n...@blastcomm.com> > wrote: I think I remember when the Airfibers first came out, there was some discussion over the use of N Connectors for 11ghz. We've been using the 11ghz AF dish with the provided coax cables and they have been fine. I have a situation where I need to mount 2 physical AF Radios to the same dish (2 SISO Channels licensed), so I'll need a longer coax for one radio. Has anyone made custom length Coax cables for 11ghz radios? -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com <mailto:AF@af.afmug.com> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
