Our Daily rate varies from $600-2500 a day.  $600 is pretty rare.  Most of the 
time it is in the $1000+ range.  

Factors in the daily rate:

1.Insurance.  This is the biggest cost we have on the tower side.  Many 
companies require 3Million in liability, with some now requiring 5 million. 
2.Operating crew size.  For maintenance and “little” stuff like your PTP 550s 
we would send out a 2 person crew.  Driving distance would be the biggest 
factor.  

After that it would depend on if it is a tower where we had to do an official 
closeout. Crown, American, etc. require paperwork if we are even certified to 
go on their towers.  We mainly stick with American these days out of the big 
ones for new stuff.  The amount of stuff required to bolt stuff to a Crown 
tower is nutty.   This could be the reason for such a high cost is if it’s 
Crown or SBA and it’s a “certified construction crew” or whatever it is called. 
 These are the crews who do Cellular and roll a full 3-4 person crew.   We 
don’t touch Crown or SBA for new stuff due to many factors.  The last crew we 
had come in was $3500 a day for Crown Work.

If it was a tower we would do the work on we would bid that job at $800-1200 
depending on distance.  That is assuming you have the proper mounts, you supply 
the cable, and things were in place ahead of time (gate codes, keys, Notice to 
proceed, etc.).  If everything is in place and everything bench tested I would 
plan on a day to get it done at 100’ on both ends.  


My .02

Justin Wilson
[email protected]

www.mtin.net
www.midwest-ix.com

> On Jul 2, 2018, at 9:12 PM, Chuck McCown <[email protected]> wrote:
> 
> I have a pair of PTP550s to hang and wire. 
> Long away from my base of operations.  About 100’ up on both ends.
>  
> Have received two quotes to hang and aim:
> $5000
>  
> $8000   ($14,000 if it goes to 2 days)
>  
> Not sure why they think this needs 4 guys to do. 
> I am too old to do it myself, just don’t have the leg strength/endurance to 
> be safe. 
>  
> 10x the cost of the radios to hang and aim???
>  
>  
> -- 
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to