Hi Tim,
I'm not certain that the v201003 reporting system will allow you to
download the report without error, but it uses a different
architecture which I believe does not have the same limits on ad
groups, etc.
Best,
- Eric
On Jul 29, 4:56 pm, tozor <t...@adlucent.com> wrote:
> Not to drag on this thread indefinitely, but are you saying that I
> could also get around my current error, if I ran the same type of
> zero impression report in v201003?
>
> Tim
>
> On Jul 29, 2:20 pm, AdWords API Advisor <adwordsapiadvi...@google.com>
> wrote:
>
>
>
> > Hi Tim,
>
> > Thanks for the feedback regarding the account structure report. As an
> > aside, the v201003 ReportDefinitionService takes a different approach,
> > removing account structure reports completely and support zero-
> > impressions for all report types. Report generations is also much
> > faster with this service, so it may be worth exploring.
>
> > Best,
> > - Eric
>
> > On Jul 28, 10:52 pm, tozor <t...@adlucent.com> wrote:
>
> > > Thanks much Eric. One comment I would make is that the Account
> > > Structure report is not a complete replacement for the zero impression
> > > keyword report because of the fact that first page cpc and quality
> > > score are not available in the Account Structure report. This is the
> > > main reason I have not switched to it. I have seen other people in
> > > this group raise the issue of the lack of support for these two
> > > attributes in the structure report. I suspect most application
> > > developers who are syncing a database from one of these reports are
> > > probably going to require quality score and first page cpc, since
> > > these are common attributes to keep in your application database.
> > > Hopefully you folks will add these attributes to the Account Structure
> > > report in the near future.
>
> > > Tim
>
> > > On Jul 28, 5:07 pm, AdWords API Advisor <adwordsapiadvi...@google.com>
> > > wrote:
>
> > > > Hi Tim,
>
> > > > It looks like the problem is that this account has over the advisable
> > > > number of ad groups for a report with that configuration. Because of
> > > > an error in the validation logic this limit isn't checked if specific
> > > > campaignIds are specified in the report job, which is why that
> > > > configuration doesn't return an error. While this job may be
> > > > currently succeeding in this configuration, since it is over the
> > > > limits it might start failing at any time. I would refer you back to
> > > > my original advice to either segment your data or use the Account
> > > > Structure report to get this information instead.
>
> > > > Best,
> > > > - Eric
>
> > > > On Jul 27, 6:12 pm, tozor <t...@adlucent.com> wrote:
>
> > > > > Here is a failed request:
>
> > > > > 51c8e997ea0e13c961b41e81559a97c8
>
> > > > > Thanks.
>
> > > > > Tim
>
> > > > > On Jul 27, 5:01 pm, AdWords API Advisor <adwordsapiadvi...@google.com>
> > > > > wrote:
>
> > > > > > Hi Tim,
>
> > > > > > Your original failed request from earlier is no longer in the logs.
> > > > > > Can you please schedule another of those reports and send me the new
> > > > > > requestId?
>
> > > > > > Thanks,
> > > > > > - Eric
>
> > > > > > On Jul 27, 2:28 pm, tozor <t...@adlucent.com> wrote:
>
> > > > > > > I made a request with all 106 campaigns and it worked. Here is
> > > > > > > the
> > > > > > > request id:
>
> > > > > > > ad94b71784836c3a7cfdc6ff2315435b
>
> > > > > > > Once again thanks very much for working with me on this issue.
>
> > > > > > > Tim
>
> > > > > > > On Jul 27, 12:47 pm, AdWords API Advisor
>
> > > > > > > <adwordsapiadvi...@google.com> wrote:
> > > > > > > > Hi Tim,
>
> > > > > > > > It looks like the account contains 106 campaigns, if you count
> > > > > > > > the
> > > > > > > > deleted ones, but your second request only includes 75
> > > > > > > > campaigns. I
> > > > > > > > believe these extra campaigns are causing the report to be over
> > > > > > > > the
> > > > > > > > size limit.
>
> > > > > > > > Best,
> > > > > > > > - Eric
>
> > > > > > > > On Jul 26, 2:01 pm, tozor <t...@adlucent.com> wrote:
>
> > > > > > > > > Here is the one with no campaign ids that fails:
>
> > > > > > > > > 32320c4e46d082fa1c100dbeebcc3b49
>
> > > > > > > > > Here is the one with all campaign ids that works:
>
> > > > > > > > > 063342a4efc425e78565e94e11d47641
>
> > > > > > > > > Thanks again.
>
> > > > > > > > > Tim
>
> > > > > > > > > On Jul 26, 9:54 am, AdWords API Advisor
> > > > > > > > > <adwordsapiadvi...@google.com>
> > > > > > > > > wrote:
>
> > > > > > > > > > Hi Tim,
>
> > > > > > > > > > Can you post the requestIds of the requests used to
> > > > > > > > > > schedule these
> > > > > > > > > > reports (the one that fails and the one that succeeds).
> > > > > > > > > > Perhaps that
> > > > > > > > > > will shed some light on the issue.
>
> > > > > > > > > > Best,
> > > > > > > > > > - Eric
>
> > > > > > > > > > On Jul 23, 5:53 pm, tozor <t...@adlucent.com> wrote:
>
> > > > > > > > > > > I appreciate the reply, but doesn't it seem logically
> > > > > > > > > > > inconsistent
> > > > > > > > > > > that I can request the same report with all of the
> > > > > > > > > > > campaign ids and it
> > > > > > > > > > > works? If I leave the campaign ids empty it fails.
> > > > > > > > > > > Wouldn't you
> > > > > > > > > > > agree that it is logically equivalent to either specify
> > > > > > > > > > > all of the
> > > > > > > > > > > campaign ids or leave the campaign ids empty? If you
> > > > > > > > > > > agree, then why
> > > > > > > > > > > does the report fail in one instance and not in the other?
>
> > > > > > > > > > > Tim
>
> > > > > > > > > > > On Jul 23, 2:27 pm, AdWords API Advisor
> > > > > > > > > > > <adwordsapiadvi...@google.com>
> > > > > > > > > > > wrote:
>
> > > > > > > > > > > > Hi Tim,
>
> > > > > > > > > > > > There are many factors that go into deciding whether or
> > > > > > > > > > > > not the report
> > > > > > > > > > > > is too large, beyond the number of keywords or date
> > > > > > > > > > > > range alone. It
> > > > > > > > > > > > is likely that there are other factors that would make
> > > > > > > > > > > > this report too
> > > > > > > > > > > > large. My recommendation at this time would be to
> > > > > > > > > > > > split up that
> > > > > > > > > > > > report into multiple reports, perhaps segmenting on the
> > > > > > > > > > > > campaignId, so
> > > > > > > > > > > > that you can get the data you need. Alternatively, you
> > > > > > > > > > > > can remove the
> > > > > > > > > > > > zero impression option, and use the Account Structure
> > > > > > > > > > > > Report to fetch
> > > > > > > > > > > > information about all of the keywords in the account.
>
> > > > > > > > > > > > Best,
> > > > > > > > > > > > - Eric
>
> > > > > > > > > > > > On Jul 23, 8:33 am, tozor <t...@adlucent.com> wrote:
>
> > > > > > > > > > > > > This remains an issue for my application and the
> > > > > > > > > > > > > account in question.
> > > > > > > > > > > > > Is there additional information I can provide to get
> > > > > > > > > > > > > a resolution to
> > > > > > > > > > > > > this issue? There must be a heuristic on the Adwords
> > > > > > > > > > > > > back end which
> > > > > > > > > > > > > is trying to make sure that a user does not request a
> > > > > > > > > > > > > report that is
> > > > > > > > > > > > > too large/expensive to generate, and it seems for
> > > > > > > > > > > > > some reason this
> > > > > > > > > > > > > heuristic is rejecting a zero impression report
> > > > > > > > > > > > > (again for a single
> > > > > > > > > > > > > day) on this account. Seems like there is a bug on
> > > > > > > > > > > > > the back end which
> > > > > > > > > > > > > is somehow being triggered by the structure of this
> > > > > > > > > > > > > account.
>
> > > > > > > > > > > > > This problem is reproducible at will, so please let
> > > > > > > > > > > > > me know what I can
> > > > > > > > > > > > > do to help get the issue resolved on your end. I do
> > > > > > > > > > > > > have a workaround
> > > > > > > > > > > > > (to include all of the campaign ids in the zero
> > > > > > > > > > > > > impression report
> > > > > > > > > > > > > request) but it is not optimal for me because of how
> > > > > > > > > > > > > our application
> > > > > > > > > > > > > is structured. I am hoping to get the core issue
> > > > > > > > > > > > > fixed.
>
> > > > > > > > > > > > > Thanks again.
>
> > > > > > > > > > > > > Tim
>
> > > > > > > > > > > > > On Jul 13, 7:20 pm, tozor <t...@adlucent.com> wrote:
>
> > > > > > > > > > > > > > When I notice the problem it is for
> > > > > > > > > > > > > > azeroimpressionreport for the
> > > > > > > > > > > > > > current day.
>
> > > > > > > > > > > > > > Tim
>
> > > > > > > > > > > > > > On Jul 13, 5:55 pm, AdWords API Advisor
> > > > > > > > > > > > > > <adwordsapiadvi...@google.com>
> > > > > > > > > > > > > > wrote:
>
> > > > > > > > > > > > > > > Hi Tim,
>
> > > > > > > > > > > > > > > Are you noticing this for one day in particular,
> > > > > > > > > > > > > > > or is it happening
> > > > > > > > > > > > > > > for any day chosen?
>
> > > > > > > > > > > > > > > Best,
> > > > > > > > > > > > > > > - Eric Koleda, AdWords API Team
>
> > > > > > > > > > > > > > > On Jul 12, 9:27 am, tozor <t...@adlucent.com>
> > > > > > > > > > > > > > > wrote:
>
> > > > > > > > > > > > > > > > I get the followingunexpectederror when trying
> > > > > > > > > > > > > > > > to run azero
> > > > > > > > > > > > > > > >impressionkeyword report:
>
> > > > > > > > > > > > > > > > AxisFault
> > > > > > > > > > > > > > > > faultCode:
> > > > > > > > > > > > > > > > {http://schemas.xmlsoap.org/soap/envelope/}
> > > > > > > > > > > > > > > > Server.userException
> > > > > > > > > > > > > > > > faultSubcode:
> > > > > > > > > > > > > > > > faultString: IncludingZeroImpressionKeywords
> > > > > > > > > > > > > > > > will make your report
> > > > > > > > > > > > > > > > too large to run. To include this data, please
> > > > > > > > > > > > > > > > narrow the scope of
> > > > > > > > > > > > > > > > other report settings in this request (such as
> > > > > > > > > > > > > > > > your View, Date Range,
> > > > > > > > > > > > > > > > or Campaign/Ad Group selections).
> > > > > > > > > > > > > > > > faultActor:
> > > > > > > > > > > > > > > > faultNode:
> > > > > > > > > > > > > > > > faultDetail:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > {https://adwords.google.com/api/adwords/v13}fault:
> > > > > > > > > > > > > > > > <ns1:code>112</ns1:code>
>
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > <ns1:message>IncludingZeroImpressionKeywords
> > > > > > > > > > > > > > > > will make your
> > > > > > > > > > > > > > > > report too large to run. To include this data,
> > > > > > > > > > > > > > > > please narrow the scope
> > > > > > > > > > > > > > > > of other report settings in this request (such
> > > > > > > > > > > > > > > > as your View, Date
> > > > > > > > > > > > > > > > Range, or Campaign/Ad Group
> > > > > > > > > > > > > > > > selections).</ns1:message>
>
> > > > > > > > > > > > > > > > The reason this error isunexpectedto me is that
> > > > > > > > > > > > > > > > the date range I am
> > > > > > > > > > > > > > > > using is for a single day. Furthermore the
> > > > > > > > > > > > > > > > account, while large, is
> > > > > > > > > > > > > > > > nowhere near as large as many of the other
> > > > > > > > > > > > > > > > accounts that our
>
> ...
>
> read more »
--
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
Also find us on our blog and discussion group:
http://adwordsapi.blogspot.com
http://groups.google.com/group/adwords-api
=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
You received this message because you are subscribed to the Google
Groups "AdWords API Forum" group.
To post to this group, send email to adwords-api@googlegroups.com
To unsubscribe from this group, send email to
adwords-api+unsubscr...@googlegroups.com
For more options, visit this group at
http://groups.google.com/group/adwords-api?hl=en
