Hello. The library. I put tape on the door (the i/o hopper...ours holds 6 tapes) of the DS3512, closed the hopper, then using the little gui on the DS3512, I choose the library I want them checked into. Then I hit 'insert media', picked the tape from the list and hit ok. (heard the arm grab the tape and put somewhere in the library). Came back to the admin server and typed my checked in command.
-----Original Message----- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Steven Langdale Sent: Tuesday, December 23, 2014 12:02 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] checkin libv command Where are these tapes you want to label? In the library or in the I/O hopper? On Tue, 23 Dec 2014 16:38 Jeanne Bruno <jbr...@cenhud.com> wrote: > Hello. hhmmm. I tried status=private. Results were the same. > > I tried: > label libv xxxxxx search=yes checkin=scratch labels=b > volr=A00560L5,A00561L5 > same results. > > Also, the maxscr on all our copy pools are fine. (difference of > allowed and used is plenty) > > I have tried status=bulk in the past, on a tape I had issues with > earlier in the year, but that tape is just sitting in the library and > no backup process has ever used it. So I'm hesitant to use 'bulk'. > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf > Of Huebner, Andy > Sent: Tuesday, December 23, 2014 10:37 AM > To: ADSM-L@VM.MARIST.EDU > Subject: Re: [ADSM-L] checkin libv command > > Below is the command I use on my virtual L180 libraries which are SCSI > libraries. > I think the difference is the volume range. > > I do not know the library you have, but some libraries are partitioned > and you have to make sure the tapes are assigned to the correct partition. > > label libv vlibTSM_4 checkin=scr labelsource=barcode > volr=s40000,s49999 search=y > > Andy Huebner > > -----Original Message----- > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf > Of Jeanne Bruno > Sent: Tuesday, December 23, 2014 8:39 AM > To: ADSM-L@VM.MARIST.EDU > Subject: [ADSM-L] checkin libv command > > Hello. We are using TSM manager 6.3.3.0. > Tape Library is a DS3512. > I'm trying to check in some brand new tapes (LTO Ultrium 1.5TB). > On the DS3512, I choos the library and insert the tape into the machine. > On the command line I use this command: > > label libv xxxxxx search=yes checkin=scratch labels=b overwrite=y > > My output is this: > > ANR2017I Administrator ADMIN issued command: LABEL LIBVOLUME xxxx > search=yes checkin=scratch labels=b overwrite=y ANR0984I Process 120 > for LABEL LIBVOLUME started in the BACKGROUND at 09:29:14. > ANR8799I LABEL LIBVOLUME: Operation for library XXXXXX started as > process 120. > ANR8801I LABEL LIBVOLUME process 120 for library XXXXXX completed; 0 > volume(s) labeled, 0 volume(s) checked-in. > ANR0985I Process 120 for LABEL LIBVOLUME running in the BACKGROUND > completed with completion state SUCCESS at 09:29:19. > > 0 volumes, but finished successfully and when I query the library > XXXXXX, the new tape does not show in the list. > > I have also tried this command: > CHECKIN LIBVOLUME xxxxxx SEARCH=YES CHECKLABEL=YES status=scratch > WAITTIME=0 VOLLIST=A00xxxxL5. > Results are the same. > > I have also tried putting the tapes on the door of the machine and not > doing the 'insert media'...again results on the same. > We just received 30 new tapes last week and I've tried about 10 of > them so far. > I have used the cleaning tape and did the clean process and also > rebooted the DS3512.....same results afterwards. > > Any help, suggestions would be greatly appreciated. > > > > ____________________ > Jeannie Bruno > Senior Systems Analyst > jbr...@cenhud.com<mailto:jbr...@cenhud.com> > Central Hudson Gas & Electric > (845) 486-5780 >
