Skylar Thompson The MOVE DATA encountered a problem with either the tape, or the drive itself. A couple things to try:
* Try marking DRIVE2 as offline (UPD DR <library> DRIVE2 ONL=N), and then running the MOVE DATA again. This will force the operation to use a different drive. If you get the same problem, then it points to a problem with the tape, not the drive. --> The drive 1 are already down. * Try running an audit on the tape (AUDIT VOL A00015L3 F=Y) and watch the activity log for problems --> I try no error during this (maybe after that move data that should be different * If you do have a bad tape, you can use your copy pool to restore it with RESTORE VOLUME. --> 1 drive down and copypool down too You might also check the logs on your library; some of them will give an indication of whether the problem is media- or drive-related. --> Just basic information no precision or else. For Richard B same response Thanks for the reply. Regards, Mickael. +---------------------------------------------------------------------- |This was sent by bobpatrick808...@yahoo.fr via Backup Central. |Forward SPAM to ab...@backupcentral.com. +----------------------------------------------------------------------
