Don't need the ATLDD, Just the Atape drivers. -----Original Message----- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Steven Harris Sent: Wednesday, April 28, 2010 4:27 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: TS3310 rapid config for TSM
Yes, Mehdi It is that easy. You might like to configure an additional control path on the library in case there is a problem with the drive with the control path that you normally use. Bring the library microcode up to date using the gui. Also install the ITDT tool, and use it to bring the drive microcode up to date if necessary. Regards Steve Steven Harris TSM Admin Paraparaumu, New Zealand Mehdi Salehi wrote: > Hi all, > As FC connection is shared by both data path and control path in TS3310 > (comparing with 3494 that needs IP for library manager), I would like to > know whether any initial configuration required for 3310 to work with TSM? I > mean is it possible just to add the library to TSM server zone, install the > needed drivers (Atape and atldd) and have it work by TSM commands? > This might sound silly, but I need this information to estimate the > complexity of using this library in TSM 5.4 on AIX. > > P.S: Please ignore logical libraries, multiple control path and other > optional configurations. > > Thanks. > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.814 / Virus Database: 271.1.1/2839 - Release Date: 04/28/10 06:27:00 > >
